• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. C

    ISO “Type B” sliding rear window

    Just finished putting mine in. Acme gasket and window from Collins jeep they have 1 left as of last week. In total I have 500+ just in a sliding window ? but I need it asap and it was a must to finish my build.
  2. C

    My (1/2) CJ8

    I would look into trailblazer as front suspension and awd transfer case. Might as well make it 4x4 again.
  3. C

    Request: Pics of under the hood fender bracket setup

    The pictures are correct. My Jeep was missing both on the drivers side. I installed one and adjusted the fender correctly to fit the rocker better. One of mine has stripped hardware and holes so I left it off and so far so good.
  4. C

    Full Door Interior Door Handles

    I would get a set of metal ones in a heartbeat if avail. I just put the TJ ones on and the door lock part is extremely weak and flimsy. The button flexes instead of pushing the rod. Ugh
  5. C

    Suspension Upgrade Opinions For A Roughly Original Scrambler

    Mine looks "classy" without going full rock crawler. It almost looks stock with all the chs running around with 37s now a days. It is a total of 4"lift. 1" body lift plus the springs and extended shackles. Tires are 32" bfg ko2s. Old man emu cs036r springs with conversion shackles and spring...
  6. C

    Stuck brake bleeder help

    Mine were stuck. Even with heat and trying an impact the caliper bleeds snapped flush with the caliper. Tried extracting to no luck. After hours of screwing around I got a set of calipers from oreileys for 50$ and threw them on in 15 minutes ? Thn I got some speed bleeders to make it faster for...
  7. C

    Rocker Trim Moulding Restoration

    Wow. I started to do mine realized it needed 100 hours to polish it and decided to just bedlinebit to match the top and bed. I reallllyyyyy wanted to polish mine out but after sanding off the paint and the anodizing it was too rough for me.
  8. C

    84 scrambler just got painted.

    Covering up the tire carrier holes for now. Since I need the tailgate to fold down to haul dirtbikes I can't use a stock carrier. These stainless carriage bolts work nicely.
  9. C

    84 scrambler just got painted.

    Good eye I actually did that on purpose to hide the liscence plate holes! I'm doing a flip down winch thingy here shortly or I may make a custom plate mount.
  10. C

    Line-up hardtop

    Mines done with raptor liner. You can spray it at home. My plans to use aerospace 303 protectant to keep uv damage down.
  11. C

    Fender support brackets?

    It's kind of a specific piece. I found some stainless ones on eBay but they are 80$ for 4. Might be worth it just to get it done?
  12. C

    Fender support brackets?

    Hello. My driver's side fender is missing the support brackets that go from inner fender to firewall. Does anyone have an idea where to purchase these? I've checked locally and no fenders or tubs I could find had them on them. Thanks a bunch
  13. C

    Technical and engine bay decal locations

    Bumping this up as I would love for an expert to chime in. Mine had some in the glovebox that were damaged/illegible
  14. C

    Removable carpet?

    Is there an aftermarket equivalent available?
  15. C

    Removable carpet?

    Hey guys I'm sure this has been covered before but is a standard cj7 carpet kit removable? Like does it Velcro around the seats and such? Is there an option out there like this? Thanks.
  16. C

    Scout or Wagoneer 44's

    Has anyone tried the Currie housing? Probably only need a custom sha
  17. C

    Yj leaf spring conversion

    You can also just snag conversion shackles like I did. The added length helped with the longer one yj springs. It rides sweet
  18. C

    Jeep Lean... thoughts?

    I went old man emu 2.5" yj springs and longer shackles. With no weight in the Jeep (top etc) it leans a minimum of 1" to the left. I found some Tacoma leveling spacers for leaf springs that are for 2.5" springs. I may try one of these under the rear right to see if that helps.
Back
Top