• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. gr8dain

    Half hard top glass install

    Ok, I had a hard time trying to put the glass back in my hard half top about a year ago. It is time to put the top back on for the winter and I would like t have the glass in it this time. Any tricks to make it easier? I assume it requires the rope method. And I assume I should soak the seal...
  2. gr8dain

    1942 GPW

    Not sure if anyone else is into these, but I love Flat Fenders and since Carol won’t let me drive her 1949 CJ3a on the trails (I agree it is too nice), I have been itching for a WWII jeep to build into a wheeling rig. I did not want it to be too nice to wheel. I found one a couple of hours...
  3. gr8dain

    Happy Thanksgiving

  4. gr8dain

    Electric vs mechanical fans?

    Ok. So I wanted to not muddy up tge fan clearance thread. So I started a new one for my question. I switched to the contour electric fan on my last 4.2 and it was OK, but had issues with the flex-a-lite control module I used and went through a few fuses causing me to overheat more than I...
  5. gr8dain

    Bed mounted spare? 35” tire

    So after my last wheeling weekend, I noticed that my swing out spare (Runck) bumper had more bounce than it used to. Welds are still solid, and the wiggle appears to be in the area where the bumper bolts to the extra awesome thick cross member I got from Chief Waho. Anyway, I pulled the tire...
  6. gr8dain

    CJ8 on a JL frame?

    Am I crazy? I picked up a 1981 Laredo last week and the frame is in rough shape. A friend has a JL chassis for sale with suspension and wheels. I know the HL is 3.1 inches longer in wheelbase. But I don’t think that is a deal breaker. Checking on other dimensions of the frame now. Would I...
  7. gr8dain

    Cool vehicles we used to own

    It was suggested to have a thread of cool vehicles we used to own. Here are some of mine No good pic but it was a 1986 XJ 2 door 5 speed 1996 Bronco 1969 GTO. This is what it should have looked like. 1967 Impala SS 1981 BMW 320 1995 YJ Current 49 Willys CJ3a and 84 Scrambler
  8. gr8dain

    Mounting latches for the half hard top

    I decided to use latches to mount my half top a number of years ago. And it has been one of the best things I have done to my Scrambler. I bought 7 latches from McMaster Carr. I have included a picture of the ones I got. I used 4 along the top of the windshield and three along the back on...
  9. gr8dain

    Jeep Art

    So I thought I had a post where I showed some scroll work my father had done. But I could not find it. Here is one that he made that arrived today. It was my birthday present. It took him a month to make. He used a picture that I took at Rausch Creek at the 2021 Scrambler Nationals in PA...
  10. gr8dain

    Where to tap into for my tach?

    Does anyone know what wire I can tap into in order to get my tach to work? It is a 1998 4.0 from an XJ. Will the aftermarket tach I had on my 258 work? It has the switch for 4,6, or 8 cyl. Obviously I would keep it on 6. Just not sure if it will work with the 4.0.
  11. gr8dain

    Visiting Idaho and saw this at the Twin Falls Sportsman Warehouse

    As the title says, I was at the store and came back to our rental truck and this was in the isle next to us. Was not expecting to see it, but was a nice surprise.
  12. gr8dain

    Wheel spacer for spare on swing away mount?

    So I have a Runck rear bumper with swing arm for the spare tire. I used to have 33x10.5 tires and the spare fit fine on the bumper. But now that I have 35x12.5, the studs on the spare mount do not reach the wheel. I was thinking about getting a wheel spacer for it. I think about 2” should do...
  13. gr8dain

    Nice gift came today

    I was not expecting to receive this today. But I very much appreciate it. My other SOA t shirt is starting to wear out.
  14. gr8dain

    Value of a postal?

    I am looking at a for sale post that is local to me. It is a postal that comes with the doors, and full top. It comes with a glass tub. I guess the steel tub is a bit roasted. I am thinking the doors and top could be worth the $4k they are asking.
  15. gr8dain

    Gr8Dain's 4.0/aw4 swap from a 97 XJ

    So I ran into more issues with my 258 and decided to swap it out for the 4.0. I picked up a 4.0 with aw4 and transfer case from a 97 XJ. I will get it later this week. I tried looking for Eric's thread on the topic, but did not find a build post, so Eric, if you have the link, I would...
  16. gr8dain

    Picked up a Dana 300 with 4 to 1 and twin sticks

    So as the title says, I found a deal online for a dana 300 that someone had swapped in the 4 to 1 gears kit and a twin stick set up. I bougt it for less than the parts and this was never installed after the conversion. It has an adapter/clocking ring for a NV3550. According to the advance...
  17. gr8dain

    Used my Scrambler to tow a trailer with my 3a on it.

    So I had a dilemma this past weekend. My local Jeep club had our annual show and I registered both my Scrambler and my 3a. But how to get them both there. Well, I borrowed a 12 ft trailer and put the flatty on it. I could definitely tell it was back there. Acceleration sucked. But I took it nice...
  18. gr8dain

    Holley Sniper EFI install on my 258

    I intended to take a bunch of pictures and make sure I document my experience installing the Sniper on my Scrambler. I probably did not get enough pictures or take enough botes, but here goes. To start off, I replaced a Holley 4bbl carb mounted on an Offenhauser intake. Is it more carb than...
  19. gr8dain

    Keeping the 1949 CJ3a in the family

    So my wife’s BFF has an uncle who has had this CJ3a for a long time. They used to ride in it on his farm in PA and she has some good memories in it. Well, he finally decided ot sell it as he and his wife are getting older. They are trying to clear out their PA property and settle in their CA...
  20. gr8dain

    Need the name of a clutch part.... please

    Hello all of my favorite people in the world. I need some help. I was on my way home and the linkage on my clutch broke and the pedal obviously hit the floor. What is the name if the part that is the bar with flat stock on either end that is the pivot to engage the clutch? I want to call it a Z...
Back
Top