Search results

I, fairly recently, installed the new Painless wiring harness into my ‘83 Scrambler. I believe I wired up everything correctly. All the gauges and lights work as they should and the jeep runs good (I also installed a Holley Sniper EFI ath the same time). The issue I have is that the gauges...

Can anyone share some photos of the bracket that secures the air cleaner assembly to the valve cover? Also, not just the bracket itself, but what it looks like in place, and how/where it attaches to each? This is for the 258 with power brakes version of the air cleaner assembly. Thanks in...

I’m sure this is buried in a thread somewhere, but I can’t find it. I currently have Dana 30/AMC 20 stock wide track with 2.73 gear ratios. I want to swap them to 3.54. Do I have to swap the carrier to go to that ratio? Thanks in advance!

So, my fuel gauge doesn’t work, and I’m afraid to run the tank till empty and suck up some junk into the fuel system. Does anyone know how to identify which tank capacity I have, maybe by outer dimensions or how low it hangs? Thanks

Can anyone please decode this VIN and tag for me ? 1JCCF88E6FT074765 Thanks, Chip

I’m in the market for another Scrambler. I have seen this one on eBay several times but was wondering if anyone on the forum knows any history on it? Thanks 1JCCM88E5BT070027 1981 for sale on eBay

Can y'all advise whether these are wide or narrow track axles? Owner says they are original to the 1984 Scrambler they are currently on. Front: Rear:

Would anyone on the forum be willing to look at a Scrambler for me in the Port Jervis, NY area? I'm trying to find another Scrambler to buy!! Please PM me ASAP if you can and are willing to look at a scrambler for me! Thanks, Chip

On CL in the Gadsden, AL area. Says it's a Cherokee but he doesn't know the year. Anyone know exactly what it is?

My scrambler has the stock drivetrain listed. I have no idea what type of fluids are in it now as I have not changed them since I bought the Jeep. Everything is operating well but my transmission is a little difficult to shift into 2nd when it's cold. I'm thinking about replacing ALL the...

I am trying to install a factory AMC radio/cb combination. I have the power wiring figured out, it's the speaker wiring that's giving me trouble. On the left side of the unit, where the power wires come out, there is also a green, white, and black wire. On the right side there is another...

Can anyone here photoshop a picture of the Xtremetops full hard top onto a photo of my scrambler? I really want to see how it changes the look before I buy one. If someone has a good right side view of the top to use, that would help. Thanks, Chip

Can someone please tell me and possibly show me with some photos where the stock location is for the water temp sensor/sending unit? Thanks, Chip

Both of these CJ8's are currently on eBay. Can someone tell if they both have the full hardtop from Rally/ExtremeTops? Thanks, Chip

The tach below is what was in my 1983 Scrambler when I purchased it in 2013. It has the 258 inline 6 but from what I have read, this tach is for the V8. (With the 5000 redline). Is that correct? How differently will this tach read as compared to the correct one (higher/lower rpms)? I believe...

OK... What's the consensus? Install a good factory A/C unit into my CJ8 or go with an aftermarket new version? My CJ8 is fairly original looking and has the original drivetrain, 4.2, T-176, Dana 300, blah blah blah... It has never had A/C. What do you experts think? Thanks, Chip

I would like to put YJ mirrors on my CJ8. I want to "relocate" them and mount them to the windshield hinge. Does anyone know if the relocation brackets for the YJ mirrors will work with the CJ windshield brackets? Has anyone done this? Pics? Thanks, Chip

Does anyone have some close up photos of original center caps? I'm trying to restore some and hoping to get a good look at the face of some originals. A close up of this would be awesome!! Thanks, Chip

I'm still really new to the Jeep CJ world so help me out here. I'm pretty sure my 1983 CJ8 has the stock drivetrain but I would like to confirm this. I think it's the T176 Dana300 combo but here are a few pictures. Could you also help me identify what front and rear axles I have? Thanks...