Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I'm interested in doing a 14 bolt swap and wondering of the guys who have done this what they did with their gas tank. Did you have to move it back and if so how far.
Although mine is still in the build phase, I have the 14 bolt under 1.5" SOA lift springs. The tank is nowhere near the axle.
I have a 15-gallon tank. I know the 20 gallon hangs much lower. I don't know which tank you have, but thought I'd throw that out there in case that is causing issues for you. There are probably some other people on here with a 14 bolt and 20 gallon tank, if that's your issue.
Yeah you know I forgot to add that. I have the 20 gallon tank. It looks like it might be tight not from the amount it hangs down but by how far forward it is to the axle. The Model 20 I'm swapping out has only about 2 inches between the cover and the skid plate for the tank. I'm thinking that I'm going to have to move it back a couple of inches I bet.
It will be tight but the 14 should fit without hitting the tank.
I had an oversized 20 gal. tank in the stock location with my 14 for years. No problems.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.