• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1984 Alaska Postal

Dunehammer

Basic User
City
Wasilla
State
AK
I was told that I should join you all on here and to put a build thread together. First of thanks for allowing me to join. Second off let's talk scrambler! :)

Let's start with the back story. About 10 years ago a coworker of mine told me about her jeep that she had that was having transmission issues. She only refered to it as a jeep. Well fast forward she offered to sell it to me a few times and finally in February of this year I was in a position to buy it. So I went and looked at it.... And snap it was a postal jeep. I did a bunch research on it and got excited so yeah I bought it dragged it home and dug in.

When I get on a computer I get you some photos. Trying to post from my phone.
 
Welcome. Love the postals. Hope you get the pics up soon. (We love pics here. Fyi)
 
SWEET!!!

Another one resurrected and I already love the story!

Can't wait to see this! Curious who told you that you needed to join up here? (they were right)

In addition to the pictures, let us know what the plans are.

I visited Wasila and the MATI to check out the restored Postal that's on display there when I was in AK to pick up my Postal from Anchorage and drive it home. Assume you've checked that one out?

Welcome!
 
:headbang: AKRWC is good people and president of the originality division, Alaska field office. Welcome and Can't wait to see pics ! :wave:


 
Alright sorry for the delay on the photos! This the rig when I set eyes on it.

13233114_10156894702045223_112009727588744614_n.jpg


13239098_10156894702090223_5929483948982930655_n.jpg


13177989_10156894702135223_6340815147504715621_n.jpg


13244861_10156894702155223_3717010657313458999_n.jpg
 
After I got it the first thin was to figure out why it wasn't running. Excluding the obvious no battery it turned out the coil and fuel pump were bad and needed replacing.
13233148_10156894702240223_7033678921935068495_n.jpg


Dropped a HEI distributor into it and a new fuel pump and a bit of timing work and it was purring as well as it could with a dirty old carter ddb carb would allow it.

I did some digging around and found out about putting a GMC TBI on a 4.2 and luck had it that there just happened to be a 1990 4.3 Blazer on Craig's list and he was willing to part with the TBI harness and computer and the front seats for $60. So I started working on putting that together.
13240012_10156894702300223_5044158345114402115_n.jpg


13233044_10156894702510223_5518120119912-1.jpg


13255947_10156926503840223_1669750907850660695_n.jpg
 
Alright so the plan is to fix the holes in the tub and paint it a dark green semi gloss with the invasion star on the hood. The top I'm planning on putting some windows in and painting it tan. Rhino line the tub. Now for clearance I'm planning on doing a 1" body lift and a shackle lift not sure how high i want to go on the shackles. I'm really wanting to do the metal cloak fenders on it just think they look really aggressive. Looking at 33" wheels may try larger. For the axles I'm going to keep the amc 20 and get the one piece axles and go for 4.10 gears and and looking at lockers front a rear. I have a winch on it already and have a bunch of lights i kept when i had to sell my last rig.
 
Depending on how motivated you are, I have a Dana 44 from an '86 CJ-7 with a Detroit and 3.73 gears that I'd entertain selling. The one flaw: it has a busted left side shaft.
 
Depending on how motivated you are, I have a Dana 44 from an '86 CJ-7 with a Detroit and 3.73 gears that I'd entertain selling. The one flaw: it has a busted left side shaft.

Well a shaft is pretty easy to fix from what I recall. How much you thinking. Should bolt right up. Is it in Alaska?
 
Well a shaft is pretty easy to fix from what I recall. How much you thinking. Should bolt right up. Is it in Alaska?

Yes, it's in Anchorage. (I'm the one who told you on FB to make this thread, and invited you to the Alaska CJs page.) And yes, it will bolt right up and reflect all OEM everything. We'll talk price in PM.
 
Hey Sorry for the long delay been in the middle of doing some moving around.

In that time I fixed my uncles CJ5 and FJ40 and got them running but my postal had been frosting up at a friends place.

I've stalled after getting the TBI in the postal and running on the 4.2. I did manage to pick up a NP435 transmission with the d300 adapter kit from NOVAK. Just need to track down a bell housing for it. I'm wanting to put a ford 5.0 in front of it that a friend of mine has sitting in a 96 F-150. The bellhousing is going to need to be a mid 80s to early 90's with the exterior mounted slave cylinder. Figured I'd have to go with a Hydraulic clutch since I'll have the clutch on the right side of the vehicle. I've been playing around with keeping an automatic in it but I like having the stick shift and thought it would be fun on a RHD rig.

Any Ideas on a different approach to the clutch setup or if you happen to have a late 80s bell housing for a ford Windsor block sitting around maybe we can talk business.

AK-RWC I haven't forgotten about you just waiting for some dust to settle before I can go after that Dana 44. Would love to see what else you got.
 
Come on over! My parts postal was already converted to stick, but not with a Ford engine.
 
You could just use the internal style slave cylinder with the appropriate bell housing. You might just need to adapt some hoses from the master cylinder to the slave itself.
 
Yea. What craveman said... You should be able to use the bellhousing off any ford up to the mid 90s, they just have an internal slave rather than external.
 
Hey sorry about disappearing on you guys. The postal project got hijacked when I got my hands on an 1982 scrambler out of Texas and it’s been claiming most of my time and funds. The postal sadly has been striped for the most part and is a rolling chassie I also picked up a second postal that someone had started swapping a Chevy drivetram into that is a sbc 400 turbo 350 and a 205. They never finished it leaving the engine on hard mounts and no drive lines or ignition system down side no title on it.
 
Hey sorry about disappearing on you guys. The postal project got hijacked when I got my hands on an 1982 scrambler out of Texas and it’s been claiming most of my time and funds. The postal sadly has been striped for the most part and is a rolling chassie I also picked up a second postal that someone had started swapping a Chevy drivetram into that is a sbc 400 turbo 350 and a 205. They never finished it leaving the engine on hard mounts and no drive lines or ignition system down side no title on it.

Do you mind sharing the VINs with us for our list? Who did you get the second one from? I wonder if it's one on our list where we were wondering about what happened to it?

Is the top/doors still with the one that you say is stripped?

Does the second one have the top/doors?

Thanks for replying!
 
Back
Top