• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

360 Exhaust

84jeepscrambler

84 Scrambler 68 Mustang
City
Kutztown
State
PA
Hello all,

I have been in hibernation for the last 6-8 months with my 84 Scrambler restoration project... With our first child's birth, new job and new house all within the last 6 months this project was put on the backburner... Now I am back in... Little update... Tub off resto, sand blasted frame and POR 15 it plus undercarriage of tub.. New floorpand welded in...Rebuilt 360 out of late 70's Wagoneer and rebuilt T 176 tranny... Tub is now attached to frame with new poly bushings all around....

Question is:::: I have the exhaust manifolds from the Wagoneer cleaned up and POR 15 high heat... I need an exhaust system for the rest of the way back... I would like to have inside the frame dual exhaust... What can I get that is currently made and sold (dual or not) for this application or is this a one off application that an exhaust guy has to bend pipes???

Thanks
84jeepscrambler
DAN
 
Duels will definitely have to be custom. If you wanted off the shelf, you could do a single pipe out the back with the system from an '81 304 CJ-7. You'd just need to add a little pipe in one or 2 places.
 
I did a custom made inside the frame system. I also changed out the headers for factory manifolds as they tucked in tighter. The passenger side exhaust crossed over just behind the TC into the drivers side then into a Magnaflow muffler. Then single back to the rear drivers side corner. I think I paid around $400.
 
CJ kits won't work with the waggy manifolds. One of the exhaust manifolds is different to help clear the clutch linkage on the CJ. I was able to acquire some CJ style manifolds off a 401 in an IH dump truck and routed the exhaust just as Grey Fox did. Except that due to my suspension setup I couldn't fit a muffler in the normal location and ended up with a long glass pack for a tail pipe.
 
Thanks guys for your help...

I guess my two options are:

1) Get CJ 304 exhaust manifolds and then an 81 CJ system the rest of the way back while adding some pipe for a single exhaust.... OR

2) Custom exhaust all the way thru for dual exhaust:

Which is more cost effective??? Thanks again for the help...

DAN
84jeepscrambler
 
cost effective

just got done putting dual system on mine. i went with shorty headers which put the exsost outlets in right place,but add almost $400 extra for it. the cheapest way is to go with cj mans & take to muffler shop. my est i got from ext shop was for $370-400 for them to remove old headers put stock headers which i would provide and make rest of sytem.
 
81 CJ 304 exhaust

I've decided to go with the 81 CJ 304 Exhaust from the exhaust manifolds back (single drivers side exit)... Any suggestions or guidance of where to purchase the whole system going back... I did a general search on the internet and found alot with high prices...

Thanks
DAN
 
Mazzdog,

I am located in Kutztown near Allentown, PA.. Mid Eastern part of the state... Are you close????

DAN
 
Back
Top