• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

81 Fuel Vent & Filler Hose

AJ2393

Scrambled in the Head
Silver Member
Lifetime Member
City
North Dighton
State
MA
I am restoring my 1981 and I have noticed that the major suppliers (4WD & Quadratec) do not sell a fuel vent or filler hose. These are the rubber hoses that connects on the passengers side from the filler neck to the tank. The major suppliers carry them for model years 82-86 for the Scrambler. Just wondering if anyone knows if there is something special about the 1981 year that the 82-86 replacements will not work. Also wondering if someone has a source for ones specially for an 81.

Thanks in advance.
 
UPDATE: Reproductions Now Availible

Just some updated information for my fellow Scrambler owners. I was unable to locate reproduction vent and fuel hoses for my 81 Scrambler with a factory 15 gallon fuel tank. The 81-82.5 Scramblers utilized the regular CJ7 fuel neck with longer rubber hoses, whereas the 82.5-86 Scramblers utilized a different fuel neck where the lines from the neck were extended (longer) and the rubber hoses were shorter. In any event, in order to get some reproductions, I sent my originals to the MTS company where they have spent the better part of the last year reproducing them. Here is the relevant information:

http://www.mtscompany.com/hose.htm
Fill Hose - CJFHCJ8-15A - $29.95 each
Vent Hose - CJVHCJ8-15A -$21.95 each

Again please note that these are for 81-82.5 Scramblers with a factory 15 gallon tank and utilizing a typical CJ7 fuel filler neck.

Note that I am am NOT endorsing the MTS company or their products. I am NOT presenting this on their behalf. Rather, I am an owner who was unable to find a part and was able to get them reproduced. I am passing this on for others who may have no other means of getting replacements. I have NO stake in these reproductions - financial or otherwise.
 
Thanks, that's great that you did this. I will be needing those hoses for my 81.
 
No problem, I was in the same boat as a lot of people. I needed the hoses and no one made them. Just got lucky that someone hooked me up with MTS to reproduce them.
 
I sent my originals to the MTS company where they have spent the better part of the last year reproducing them. Here is the relevant information:

http://www.mtscompany.com/hose.htm
Fill Hose - CJFHCJ8-15A - $29.95 each
Vent Hose - CJVHCJ8-15A -$21.95 each

Again please note that these are for 81-82.5 Scramblers with a factory 15 gallon tank and utilizing a typical CJ7 fuel filler neck.
Thank you for doing this! I plan to order one of each from them. I went to their website and it looks like I need to call them directly. No problem! Thanks again!
 
OK...OE Guru's..since there is a difference between early and late 82 hoses....is there a difference in OE plastic fuel tanks?
 
OK...OE Guru's..since there is a difference between early and late 82 hoses....is there a difference in OE plastic fuel tanks?

The 15 gallon steel and 20 gallon plastic factory tanks do use different hoses.
 
MTS now stocks both the 81-82 and the 83-86 20 gallon hoses. There seems to be a difference.
 
When i talked to MTS they said they make on set for the 20gal. 81-82 have the short gas filler neck and the 83-86 have the long filler but MTS only make the 81-82 set which is longer. If used on the 83-86 its trim to fit.
 
Back
Top