• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

82 Scrambler and long overdue introduction

I personally love the white 1/2 soft top. Makes it really stand out.
 
The white top looks good. If both were white that would be too much white IMHO. I like the flares. Do you know who makes them. Looks like a good match with 35" tires.
 
Entertaining story! I really like the soft half top and the flares. Aren't they TJ flares?
 
If they are TJ flares, did they have to trim the tubs corners to fit or does the corner stick out (inside the flares) and it can't be seen in the pictures?
 
I had to replace some of the flares and the rugged ridge was a near exact replacement. I think they look good too. Nothing has been trimmed so nah true wheeling would probably force some trimming. The steel is black under the flares so you don't even see them. I crawled up a large rock about a wheel ago and once the front end was about two feet off the ground I had the rear of one front wheel contacting the fender slightly. Not a big deal for me as I won't do hardcore wheeling.
 
I need a detail picture of how all your shift levers are installed (inside the cab) I am about to go through that rodeo with my CJ 6 project and it looks like something I might be able copy, adapt or out right steel the idea.
 
By far the most important piece. Every time something happens to the hula girl, something bad happens. If the hula girl is happy...
 
Thanks for the pictures helps give me some more ideas on what might work.
 
Ghostwave- that story had me glued to my couch! I actually didn't want it to end! Can you just make up some new fictional material to keep it going?

Super nice rig! Glad it all worked out in the end.
 
Great story. She sure turned out nice. Do you ever offroad it? Would be a shame to waste the capability of the Atlas & lockers.
 
I have not really off-roader her, mainly because it's been first things first. I'd like to get a few more road trips into her to really shake things out. I have more of an overland vision with this one. That said, I still need to get the warn wired back up as I'm relocating the control box. It will live under the battery tray, so that means both need to come out, then I need to do the heater fan upgrade. Also, when I put the serpentine on, I added an ac which I should get fittings for this week so I can finish adding onboard air. I may have to pull the water pump to fix a weeping gasket on the serpentine bracket, so again, more time.

Lots of progress and I'm happy to be where I am, but she's not quite reliable for trails just yet especially missing some essential trail gear.

Likewise, I have a certain steel top that will start receiving more attention soon with any luck. That will suck up most of the oxygen In the room until it gets fully fitted up, body work and such.

Last week I put a laser pointer on the serpentine pulleys and figured out what I think was throwing belts. Did about 4 hours worth of driving since and so far looks good.

Welcome to 2015. Looking forward to this year and hoping for the best!
 
Back
Top