• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Aaron's CJ8 Rebuild back from 15 years on the farm.

Aaron,
Have you decided what you are going to do with those lower rocker panel moldings?

Ted
 
Ted,

I saw your email they're already sold.

No real update on project getting orange jeep trail ready for spring.
 
Well after getting everything else going it seems the cj8 is headed back to the top of the priority list.

Still need full rear floor and 4 corner pieces, the piece below raised lip to the bed and a few others, then comes a rear carrier, and a lift. Oh and a better front clip, $2,500 current budget is going to fade fast.

Any good links or advice will be appreciated.
 
Good week for the scrambler. Rear floor ordered, 4" bds lift in transit to me, and decided to go with an ected for the 20.

This weekend pulling tub off the frame to get rolling chassis stripped and start rebuild. Wish me luck.
 
ea8a7b03cd1e1af6008ad33aee8f3f55-1.jpg
 
Doesn't look much different but now only the thing left are springs and axles. Loaded it on the trailer and washed the frame, looks good no rust.
 
Need some insight guys!

Where is the best place to get replacement body mounts to weld to frame, and replacement of rear 2 cross members?
 
Listed my orange jeep for sale to help finance this build. Got to meet a fellow scrambler owner named Dennis when he came to look at it today. Hopefully it finds a good home soon so I can focus on the 8!
 
Been slacking on jk build. Sold yj7, sold xj and decided on v8 for scrambler.

Oh and been working on new toy. 08 Rubicon

[/URL
 
Good choice. I'm currently installing a 5.3 in my own Scrambler.
 
I'd missed this build until now. Hope to see it come together for you soon, you seem to have a great start.
 
Mine is a 4.2 bottom end with a 4.0L top and EFI, Idont know if thats the same as a stroker or not

For the record, this is not a stroker. You've done the 4.0 head swap and EFI on a 258. You still have a 258 for all intents and purposes and this combo isn't going to give much power bump at all as a result. People do this to get the drivability of the EFI relatively cheap (without getting into a Howell, Mopar MPI kit, etc). It's a nice setup for a rig that sees trails and can save some money over other options to get injected.

A stroker uses a 4.0 block/head with a 258 crank and rods. Depending on the amount of cylinder overboring and the specific pistons used, you can get to 4.5 - 4.9L displacement out of that setup. The idea is to get the low end torque of the 258 with the better (compared to a 258) top end.

I intend to end up with a stroker in the Postal eventually, it's why I did the 4.0L swap a while back, so the stroker install becomes a straightforward long block swap.
 
Thanks guys I'm motivated to start on it again. Hopefully I can get through frame cleanup and regear axles by oct.
 
Back
Top