• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Adding a third bow to a Scrambler Bestop Supertop

So this is the front bracket for the first bow. The rear bracket has a smaller channel that fits inside that connects to the third (rear) bow. There are 3 rods (2 horizontal, 1 vertical) that connect the windshield, first and second bows. Straps connect the second and third bows. I hope this helps and I can take a pic of the rods connected to the windshield and bows if you would like. On my jeep the inside edge of the brackets mounts flush with the inside edge of the tub.IMG_20200509_161040078_HDR.jpgIMG_20200509_124834161_HDR.jpgIMG_20200509_125139214_HDR.jpg
 
IMG_8194.jpgI decided to follow Jake's lead on adding the third bow to my Bestop. I didn't have any extra bows laying around so I went with what I know. I got a piece of 3/4" EMT and bent it up to fit inside the rear bow. Drilled a few holes and added some straps and it works great. We'll see how much difference this makes later this week when I'm dragging it down the highway at 80.
 
You must log in or register to reply here.
Back
Top