• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

anybody got 81-82 decal layout measurements

jeepinjosh

Basic User
City
pell city
State
al
:bacon: my factory decals showed up today from phoenix graphics.

but...as the story goes with my jeep..the body shop guys didnt get the measurements on my factory graphics before they blasted it...or they lost them..:confused:

anyone got a list of measurements for all the decals????
 
Need to save this for my decals later. Once you get the decals applied please share pics and anything you learned from the process.
 
:cheers: thanks for the pics.

:banghead: unfortunately...I failed to mention I have the SR graphics package.

If I end up doing it myself...I'll put up some notes. As of now, I'm leaning at having someone else do it. I got a vehicle wrap place quote me $200..which sounds high...but cheaper than buying another set of graphics...:shrug:
 
:cheers: thanks for the pics.

:banghead: unfortunately...I failed to mention I have the SR graphics package.

If I end up doing it myself...I'll put up some notes. As of now, I'm leaning at having someone else do it. I got a vehicle wrap place quote me $200..which sounds high...but cheaper than buying another set of graphics...:shrug:

If you think about it, that's 4-5hrs of work - which is likely how long it'd take you if you were good at it.

... And then it may wind up looking like this one (for sale in Scottsdale)

00w0w_cKSBHt1Qs4i_1200x900.jpg
 
Last edited:
I had a local hot rod guy help me put the decals on my red Scrambler, he told me $50 should cover it. Four hours later, he realized he should have asked for more :twocents:

The Phoenix decals are a little different then stock, not much, but a little. From the factory, they just stuck them on any which way, no precise measurements :twocents:

I started to pull exact measurement off of JeepAddict's original paint/decal green Yard Scrambler when it was in my yard. The measurements were off from one side to another :crazy:

The best way to do it - just eyeball it. BUT, use lots of soapy water so you can move the decals around a bit before they stick :twocents:
 
Soapy water, yes. And it doesn't take much soap.
Its not possible to have too much since you are going to squeegee it all out.

I trimmed them and mocked them up.
hood ref sml.jpg

I used tape and marks on the mask cover over the actual decals to get them aligned where I wanted (above).
ref mrk sml.jpg

Then peeled the backing slid them into place and started pushing water out. Biggest thing is to be patient in how long you wait to peel off top mask. The longer I waited the better the decal stayed in place and didn't stretch/move. Fan and/or light heat gun can help too.
 
Back
Top