• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Baffling question

CrashBandit

Scrambler Rookie
Lifetime Member
City
Aurora
State
CO
Looking around I'm only coming across mentions of whole fuel tanks.

I have a 20+ gal aftermarket tank of unknown origin.
It's basically a flat metal box that I had to de-rust and seal.

Has anyone tackled the fuel baffling issues when reusing the older tanks going from carbureted to EFI?
One of the previous owners cut/hacked the CJ fuel sender mount out to mount up a YJ fuel pump assembly.
By itself it isn't bad except that it's in the back left corner and the pickup is a full inch off the bottom of the tank.

I'm struggling with finding an affordable solution to control the potential fuel starvation issue, and I'm about down to fabricating something once I can acquire a welder.

What all have yall tried?
 
I used one of those tanks, made by Trailquest in my build. I made a mount for a GM fuel module, it self adjusts for depth and has a built in reservoir. The picture for that should still show in my build thread.

I take that back- just checked my build thread...it's pathetic. lots of text, no pics...:(
 
Last edited:
I used a Genright but Cha-ching.
 

Attachments

  • 46.jpg
    46.jpg
    52.1 KB · Views: 80
I used a Genright tank that I modified to take a chevrolet fuel pump similar to how Randyzzz did his. I did that because I had the pump that came with the engine. Works great. I see that Genright has a ten percent off sale with free shipping right now.
 
Back
Top