• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Brake pedal going to the floor

Norm02

Basic User
City
Dallas
State
TX
Hey all, I was backing my Jeep out of the garage this morning and the second time I applied the brakes, the pedal went to the floor. After I pumped it once the pressure came back and then I didn't have any other issue with it on my way to work.

On my way home from work, it happened again twice. I got it home and looked at the master cylinder and it has the correct amount of fluid in it. I then went around to the inside of all of the wheels and looked for anything loose or wet and found nothing.

Needless to say, I am a bit concerned about my brakes giving out when I am driving. This is my daily driver and I depend in on it to get to work and to client meetings. Any ideas as to what could be going on?

Thanks!
 
I must caveat my statement by saying i am a brake neophyte...but hydraulically speaking, it sounds like bypass in the master cylinder...if the piston moves and there is no fluid leaking...it almost has to be blowing around the piston in the master cylinder :twocents:
 
So does that mean that my master cylinder is going out? If not, what is the fix for the problem?
Thanks!
 
that is what it sounds like to me...but i could be wrong. I was hoping to see others opinions as well
 
I went to go and get gas, about 1 mile away, and it is not acting up any more. I guess I will keep driving it and see what happens.
 
I went to go and get gas, about 1 mile away, and it is not acting up any more. I guess I will keep driving it and see what happens.

Famous last words - second only to "Hold my beer, watch this."
 
Famous last words - second only to "Hold my beer, watch this."

Kind of hard to figure out what is wrong with it when it hardly ever acts up. I'm not wild about the idea of driving with an intermittent brake problem, but I'm not going to throw parts at something when I'm not sure what's wrong with it.
 
I know, I'd probably do the same thing. It's 10X harder to deal with if it's your only car, daily driver, etc. Just didn't want your last typed words to be here for all to see. Do you have power brakes? I don't think it matters, but it helps trouble shooting when all you have to replace is an MC. I don't know much about them, but I've read there are aftermarkets of varying quality out there.

You might try posting on Jeep Forum or searching/posting some other forum that gets hit harder. I'm sure I've seen this topic pop up before, and Scott is dead on as far as recommendations.
 
It sounds like the m/c to me. Be sure to replace it with a new one, not re-built. It's a few bucks more, but well worth it. Most re-builds stink, even if they have a lifetime warrenty.
 
If the problem persists I will deffinently replace it. How hard are they to change out?
 
Dunno - but your ebrake is still functional, right? Just remember that if it ever comes up in an emergency.
 
I would change the master-cyclinder ASAP with a new one. Its not worth a crash to you or some one els. They are not very hard to do. You just need to get ALL the air out of the lines. I would bleed ALL the old fluid out any way.

They are not very pricy.
 
I wouldn't drive it again until it is fixed. If the fluid is full, my guess would be a bypass in the master cylinder. You can pick up a new one for less than $100.00. It bolts and screws in. If you can tighten and loosen a bolt, then you can replace it. Trickiest part may well be the cotter pin on the brake pedal. You will need new brake fluid, and you will need to bleed the lines.

Here is a link to the parts, item 28:

http://www.quadratec.com/advisor/jeep_oem_replacement_parts/brake/cj_brake.php

Once you find the part that fits your jeep, you can search other places for the manufactures number to get the best price/shipping.

Example:

http://www.google.com/search?q=8134...&hl=en&tbs=shop:1,p_ord:p&fp=b69933d19f024e3b
 
I agree with cj8 Terry and rustycrawler....replace your master cylinder.

There is nothing else in the braking system that would have the symptoms you mentioned but the master cylinder. Read the instructions included with the M/C and bench bleed it before you install it.

$100 + an hour of labor is pretty cheap insurance.
 
Yeah, I think that I am going to go ahead and do that. I'm not terrible at fixing things, but I've never done any brake work. I'm assuming I need to bleed all of the old fluid out of the system first, then unbolt the old cylinder and then bolt on the new one. Fill with fluid and bleed brakes until there is no more air in lines?
 
Towed it to the repair shop since they bled the brakes for me when I first got it. I'll keep you all posted. :banghead:
 
Back
Top