• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Brake warning light

Hmm - that would be wrong on the standard setup - unless i have completely lost it i thought that the larger reservoir (front brakes) was at the booster (back) of the mc. The smaller reservoir (rear brakes) would be at the front of the Jeep.
ie the picture below is commonly seen but maybe wrong depending on the mc.

STSFCN - could you take a pic with the mc cover removed to see if there is a difference in the reservoirs?
iu
 
Another question, what size are the outlets on the mc - and which is which. One should be 1/2-20 the other should be 9/16-18. I believe the 1/2-20 is usually for the front, (I have no clue why the smaller fitting would be on the front line), again if the reservoirs are the same then it may not make a difference.
My guess is that you should try to switch the lines from the mc to combination valve if all else fails.
 
I had to look at mine. Apparently it’s been long enough ago that I forgot what was backwards from the original… I had to bend the larger rear line to match the port on my master. For whatever reason the larger 9/16” port is for the rear. It looks like you do have it correct. Sorry for the confusion on what backwards was.C0A0C4BE-B4FE-4D37-ACB2-F39598DC0B71.jpeg
 
The reservoir sizes are the same. The only other option that I have not tried is bench bleeding. I have bled the MC on the Jeep 2x but will try it this way just to make certain I am giving it enough of a push to get all the air out.
 
Back
Top