• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Bumper end caps fit what?

Kim Dawson

CJ-8 Member
Member
City
Molalla
State
Or
I've made end caps that fit our Scrambler bumpers. Now I'm going to make end caps to fit the J-10 or Honcho trucks for 1977 to 1979. I'm haven't had any of the Jeep trucks so I'm asking for a little clarification of which ones had which bumpers and end caps. I thought the 1980 Honcho hand plastic end caps that were a different size than the Scrambler end caps. The earlier end caps were steel and tack welded to the bumper. I'm making aluminum ones that can be bolted to a brace that needs to be welded to the inside of the bumper. The collector that asked me to make these end caps isn't aware of any end caps special for 1980. So does anyone know if 1980 was the same or different than the earlier or later years?IMG_0003.JPG
 
I thought someone once said the 1980 Honcho had a different size plastic end cap. Anyone have any knowledge on this?
 
The slight misalignment doesn't bug me but if you wanted you could grind them to match. I have a set of spares to replace my CJ endcaps if I bust them, GOD forbid.j10 endcap 3 4.JPG
 
The situation on the J series bumpers is that up through 1979 model year they had the metal cap that was part of the bumper structure it’s welded on it’s not removable. But for 1980 they decided to go plastic end but the bumper height stayed the same before the Scrambler was introduced so therefore you have a special unique plastic end that is taller. Jeep called these bumpers type 1. then when you get to early 81 and up they made all the bumpers the same height for Scrambler and Truck but when they made the plastic caps you could swap the sides either way that’s why one side is longer and one side is shorter on the top edge if that makes sense. So basically the part number is the same but is used on opposite sides and vice versa on Scrambler bumper versus a truck bumper
 
1980 type 1 bumper with plastic ends. Same height as prior bumper hence the unique larger looking ends vs what we are used to seeing on the Scramblers and Later Js

1617356527728.jpeg
 
Here you can see one long side and one short side of the edge. This cap would be RH on a Scrambler and LH on a J.

653E623E-54C5-437A-A3FA-FE7CBB52BB96.jpeg
 
Best explanation on end caps ever. I didn't know why one side was shorter until now. The king of Jeep trivia comes through again. Thanks Eric.
 
One has to appreciate the thought that went into the design. 👏:cheers:
Thanks for that bit of info.
Do we think it was design or luck? and was the end cap design around the bodies or the bodies around the end caps? Based on what I have heard about AMC, not so sure of the answers...
 
Do we think it was design or luck? and was the end cap design around the bodies or the bodies around the end caps? Based on what I have heard about AMC, not so sure of the answers...
I think it was luck and in fact they just fit better that way. You can see in this comparison pic the j bumpers are notched but they curve at the ends on the full width J Townside but on the Sportside and Scrambler bumpers (same width but with lip vs no lip) they don’t have that start of the “curve”. A Sportside Bumper is basically a Townside truck bumper cut shorter.

3403F8E7-6CC5-4E2A-A670-D2AC8213B233.jpeg
 
C989FBB3-6C17-4684-BE0D-91984094491B.jpegFlex n gate made these bumpers for a variety of vehicles other than just Jeep. Pic below is for Ford F series. From what I can gather the Type II bumper height is most common.

1980 is unique as first & only year they switched to plastic caps. I’ve seen only a handful of 80 bumpers.

JJ glad to see you still have Yellow J10 I found.
 
View attachment 92807Flex n gate made these bumpers for a variety of vehicles other than just Jeep. Pic below is for Ford F series. From what I can gather the Type II bumper height is most common.

1980 is unique as first & only year they switched to plastic caps. I’ve seen only a handful of 80 bumpers.

JJ glad to see you still have Yellow J10 I found.
Man that Cherokee looks great, love it. 👍 I would love to find one like it.
 
I think the plastic caps came on multiple years of stepside. Both my 81' and 82' had plastic end caps. But knowing AMC they probably used whatever was on the shelf .
IMG_0389.jpg
 
Back
Top