• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

CJ10 and CJ8 hardtop interchange???

crucescrawler

Legacy Registered User
City
Las Cruces
State
NM
Been a while since I've been on, burt anyways... will a cj 10 aircraft tug vehicle hardtop and doors work for a scrambler? I know that the doors and glass are a little different/ugly, but will they work?
I was talking to a guy abot how the top can be modded to fit the cj doors with the curve rather than the cj 10 sharp corner.
 
Been a while since I've been on, burt anyways... will a cj 10 aircraft tug vehicle hardtop and doors work for a scrambler? I know that the doors and glass are a little different/ugly, but will they work?
I was talking to a guy abot how the top can be modded to fit the cj doors with the curve rather than the cj 10 sharp corner.

Not the top. The CJ10 cab is about 1.5" shorter front to back than a Scrambler. I think the doors will work if you have a World Cab but not with a standard Scrambler half or full top.
 
Been a while since I've been on, burt anyways... will a cj 10 aircraft tug vehicle hardtop and doors work for a scrambler? I know that the doors and glass are a little different/ugly, but will they work?
I was talking to a guy abot how the top can be modded to fit the cj doors with the curve rather than the cj 10 sharp corner.

Grantshire is correct on all counts.

And here's a some photos of CJ-10a jambs modified to work with normal round corner doors. (The roof panel actually isn't from a CJ-10a, but the sides/rear wall is a lengthened CJ-10a part). This one has removable corner filler/upper jamb pieces to make it compatible with round corner doors (in this case, TJ doors):

UpperJambs7-1.jpg
 
Of all the things I have seen you build (online of course) the Retro-Wrangler is my favorite by far.
I didnt mean to hijack the thread at all...I just love to look at that thing.
Todd
 
Good deal. I guess I might go to chopping a 7 top then and do some fiberglass work. 8 half hards are pretty tuff to get ahold of.
 
Back
Top