• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Cowl door stuck. HELP!

TXJEEP

Legacy Registered User
City
Copper Canyon
State
TX
My heater was not working and I had a broken cable so I decided to remove the unit and rebuild it. After getting everything out and removing the cowl cover on the outside of the jeep I reached in to clean out any debris. There are two doors in the cowl which allow fresh air into the cab. The driver side moves nicely but the passenger side will not move easily. This is probably what broke the cable.

The question is what can I do with this door? Do I have to remove the entire cowl? Any advice would be appreciated.
 
That door is activated by the mechanism that is basically behind the passenger speaker. If you crawl under the dask you'll be able to see it sticking from the airbox assembly.

This is a picture of what is "up there". Hope it can help.

heatercontrolsonbox.jpg
 
The linkage is well greased and moves well including operating the flap on the driver side. The passenger side flap sticks and only moves with a lot of force.
 
Be careful.
I was messing with the passenger's side fresh air intake last week. It wouldn't move so I put a little grease on it and started forcing it opened & closed (I thought). Turns out, the hinge wasn't moving; the rod was breaking. So now my vent is wide open but the rod is broken so I can't close it.
Sad!
Great picture help from the previous responder btw.
Schlap
 
yeah, I stopped messing with it when I figured out that moving the door was moving its post within the linkage without moving the linkage. I do not know if anyone repairs these but without fixing it, I will have to close the cowl. duct tape for now.
 
Back
Top