crown fender flares

[orange150]

Well. I got them to fit. I went out to grab some pictures of their poor fitment (below) and started thinking that maybe I should try to get them mounted up to first, then work down. I was starting with the bottom two and trying to work up.

 

[orange150]

And installed.

 

[Randyzzz]

Those look great on there!

I see a couple hose clamps and what looks to be a larger diameter fill pipe. Do you have a different tank? If you do and the fill pipe is larger, how is it working out?

 

[orange150]

Yea I have the OE 20gal tank but the fill hose is the stock diameter. That’s just how I spliced the hoses to fit the tank.

 

[Randyzzz]

Looked larger to me. I’m doing a larger diameter hose and I was hoping you might have done one first.

 

[californiajeeping]

Yea that's the one I bought.
Did not fit. The top lip of the flare was about a half inch away from the body of the fender. I didn't want to stretch it to fit as I was worried about putting too much tension on the holes in my body.

You need to start at the top middle and work your way out and down. Doing the bottom ends last.