Dana 300 single shifter link bushings

[valkster]

Hello, all. Where can I find the plastic flange bushings used on a stock Dana 300 shift linkage in my '83 Scambler? They are the pivot bushings for the shift link itself. There are two of these that the shifter sits between, made of plastic and have the following dimensions. They are 1" long, 9/16" ID, 5/8" OD, with about an 1-1/32" OD flange. I have looked at several websites but most are advertising a twin-stick conversion kit or do not call out this particular part. Thanks in advance for any help.

Sincerely,
Mark

 

[Truck]

http://www.jeepdoc.com/catalog/zproducts.asp?id=213

You may have to call to be sure but it is either the

31) Shift Fork Plastic Insert (2 Needed)

or

Bushing, Shift Lever Pivot, each, 2 Required - I think this is the one you are talking about.

Truck

 

[valkster]

Thanks much, Truck. The second one you listed is the one I am after, I think. The first one, I am sure, is the rectangular plastic inserts that fit on the end of each shifting fork inside the case. I appreciate your help, I'll call them Monday to confirm they have what I am after.

Sincerely,
Mark