• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Dana 60/30 Question

LimeLight

Legacy Registered User
City
Charleston
State
SC
Howdy all,

I guess I'll use this as my intro...I've been lurking for a while, trying to absorb as much knowledge as possible (I'm a novice at best). Purchased my first Jeep, 1983 CJ-8 earlier this year. She's fairly stock and a ton of fun. Standby for pics and more specifics. On my to-do list is a rear end upgrade and better brakes.

Today I discovered this on my local craigslist:

http://charleston.craigslist.org/pts/3158661965.html

Can anyone tell me if this is a good price (seems very low), worthwhile purchase, or steer me to/away from this? Any advice you guys can provide is greatly appreciated!

Thanks!

Chris
 
A dana 60 never came under a wagoneer. Maybe he has a dana 44. A dana 60 has a big diff and will hang low, so you would need to run at least 37's with the dana 60. But the dana 30 will not be strong enough for that. If it's a Dana 44, good deal.
 
The listing was already deleted by the time I looked at it. But,

If you want to keep the vehicle more stock ( 4" lift or less, 33" tires or smaller ), you should replace the axles in the AMC 20 rear with aftermarket one-piece shafts, and replace or rebuild the Trac-Lok unit inside the differential. Google AMC 20, and you will see pictures of the rear end that you are most likely to have ( It is round ).

If you have a Dana 44 rear, then you have no need to change anything, unless you want to rebuild the stock components or swap in a different limited slip/locker.

Dana 60s are for big tires and big lift ( or heavy body trimming ).

Another common swap is an early Bronco big-bearing 9" , or the Ford 8.8 from an Explorer ( though that has the TJ bolt pattern, 5 on 4.5", rather than the CJ/Ford/Dodge 5 on 5.5" ).

Good Luck!
 
Back
Top