• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Differential Question Please

Wayne

Legacy Registered User
City
Cape Coral
State
FL
IMG_3459.jpeg
Hello - by looking at this Dana differential can anyone tell which differential model this is? - it is on an 82 model and original.
I have a leak and I’m wondering if there is a gasket that needs replacing or use some sought of silicone/caulking? Also - I have looked everywhere for a fill plug any idea where it would be?
Cheers.
 
View attachment 109782
Hello - by looking at this Dana differential can anyone tell which differential model this is? - it is on an 82 model and original.
I have a leak and I’m wondering if there is a gasket that needs replacing or use some sought of silicone/caulking? Also - I have looked everywhere for a fill plug any idea where it would be?
Cheers.
AMC 20
 
Similar to an automatic transmission without a drain plug, you loosen the cover to drain the housing.
 
Similar to an automatic transmission without a drain plug, you loosen the cover to drain the housing.
Appreciate it - so how do you fill it? Any idea what model # the diff is. I need to research it to see if it has a gasket or some sort of caulking?
 
Fill plug is on the front side of the diff. 3/8 Allen wrench for the plug removal Diff is AMC 20 as noted before 674B43FC-1714-4A18-8903-F87BFE0D65C6.jpeg13DA4CC5-9DB3-450C-B5BF-4642224F98FC.jpeg
 
If you clean this area up, there is a one or two letter code stamped on the housing that will tell you the gear ratio and whether it's open or limited slip (or at least it will tell you what it was when it left the factory, but a prior owner could have changed it). Should be A or AA, B or BB, C or CC, or D or DD

If you want to keep it all original, pull cover, drain, get a cork gasket, reinstall, fill with new gear lube.

I replace those Torx head screws with regular bolts on mine when I take them down. Not original, but those torx heads can be a bear to deal with.

MAKE SURE YOU GET THE FILL PLUG OUT BEFORE YOU DRAIN IT. I had to weld a nut on my fill plug to get it out, and had already drained the diff. It was pure luck that I was working on it in a friend's shop who had a welder. Had I drained it in my driveway, and then not been able to get the plug out, it would have turned into a real pain in the rear.
 

Attachments

  • AMC20.jpg
    AMC20.jpg
    297.8 KB · Views: 1
Thank you gentleman - appreciate the input. Found a gasket online I need to locate the fill plug later.
 
If you clean this area up, there is a one or two letter code stamped on the housing that will tell you the gear ratio and whether it's open or limited slip (or at least it will tell you what it was when it left the factory, but a prior owner could have changed it). Should be A or AA, B or BB, C or CC, or D or DD

If you want to keep it all original, pull cover, drain, get a cork gasket, reinstall, fill with new gear lube.

I replace those Torx head screws with regular bolts on mine when I take them down. Not original, but those torx heads can be a bear to deal with.

MAKE SURE YOU GET THE FILL PLUG OUT BEFORE YOU DRAIN IT. I had to weld a nut on my fill plug to get it out, and had already drained the diff. It was pure luck that I was working on it in a friend's shop who had a welder. Had I drained it in my driveway, and then not been able to get the plug out, it would have turned into a real pain in the rear.
That’s a great help thank you. I’m confident it’s original. I remember I was in there once about 15 years ago - but that’s about all I can remember. Appreciate it.
 
As mentioned above...

AMC 20.JPG
The number of teeth stamped on the original gears can also help confirm the ratio.
 
You can also purchase an aluminum cover that has a drain plug. It will rub against the 20 gallon tank if you don't "modify" the skid plate.
 
Back
Top