• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

ELECTRICAL DILEMA

Horace

Member
City
Monticello
State
MN
Here's the deal. started redoing my scrambler about 5 years ago. Using an E-Z Wiring 18 circuit kit I did 75% of the wiring. After sitting for those years not really sure what happened but only have a couple running lights now.I was going to try and spend a day to figure out before redoing again. My questions are is there any difference in wiper motors(meaning speeds,intermitten,etc..) and how to tell not sure what year dash and such harnesses I used. Any help would be great. I can take pics or what ever anyone needs. Thanks in advance for any help
 
Where to start. For lights, obviously check each non-working bulb for power and ground. Also make sure the contacts at the bulbs are clean after sitting so long.
There’s a 3 wire and 4 wire wiper motor. 4 wire will get you intermittent. Make sure you have power at the switch and work your way to the motor. Again, grounds- most common cause of issues. Just because a ring terminal is screwed to metal doesn’t mean it’s passing current.
Jeep dash harnesses were all a mess in my opinion. Don’t know where/what you’re really asking there. I’m using a similar harness on my current build and have wired many a hot rod with them before. Hopefully you got the one with the labeled wire insulation. Makes tracing problems a lot easier. Good luck!
 
Thanks Randyzzz,
The wiper question I think you may have helped with, I will try out tomorrow hopefully. I was going to check all the grounds and add more possibly. It's hard to ask my exact questions cause I forgot where I left off and don't know where to start...LOL
 
Been there. No matter how many notes you make on a Rewire, when it comes down to repair/retracing what you did, it’s a headache.
 
I checked it out I have to blow it up so much I can't read the letters.thanks i'm going to keep trying
 
I think if you download it to your computer and then print it at a larger size ( making the printer print on several pieces of paper and then taping together) it comes out ok. Or download the file to a flash drive and have a local copy store print it larger.
 
after wasting a day of trying to figure out what the deal is I pulled the dash out and am going to start to unwire all the lights and dash.I had it running so I won't mess with any of that. Anyone want to help.??.. lol Wish me luck. Is there anyway to get rid of the intermitten wiper box? gonna get the wiring schemetic blown up at office max today
 
Back
Top