• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Exterior Line-X???

Osprey

The Duckbum
City
Cambridge
State
MD
Anybody do a full exterior Line-X (or similar) job on their Jeep? I've seen one CJ5 done, with it colored dark red. This winter's project is body work and paint and am considering doing this instead of paint. Going to stick with black if I do, I like the tactical, matte black look anyway.

Pros? Cons? I imagine durability, rust prevention and scratch prevention will be great, but what about fading, cleaning difficulty, etc.???
 
Rhino Liner

Just had the interior/exterior of my tub done in Rhino. It is softer than Line-X...so the trail ride this weekend end should be interesting to see how trees and rocks treat it.

I'll let you know how it goes and post up some pics afterwards....

Mike Warner on the boards (WildTurkeycj8) has white line-x on the exterior of his rig.....looked good last time that I saw it.


(on another note...need some info from you when the birds start to show up in your neck...I'm interested in doing a guided hunt up there this year)
 
Line-x

My fenders, doors, and tailgate are line-xed and I love it. So is my windshield frame, no more rust. That stuff is the best, holds up great.
 
Mike/WildTurkey peeled all of his off. It had a lot of hidden and trapped rust under it. Mike can chime in with more info.
 
Rust

The only way that there could be rust underneath, is if there was rust underneath already. If the surface was not properly prepared then that could be possible. but if no oxygen can get to the metal than no rust- The inside of a can of vegitables never rusts, but the outside does.
 
My rig had been covered about two years with red liner, as with anything it has pro's and cons. It did fade after about a year and did not look good till I sprayed clear over it. It will hold up better than paint to limbs and rocks I've hit rocks and it did not come off. Its a lot cooler to the touch than paint in the summer and it covers up bad body work very well. The Bad It will tear the crap out of your fingers and knuckles when you are working on your Jeep. mine did stain in some places before I put the clear on. Make sure its what you want It takes forever to get it off. It took me two gallons of aircraft stripper and lots of time with the pressure washer to remoive mine.
 
scramblemog said:
Its a lot cooler to the touch than paint in the summer and it covers up bad body work very well.

Do you think that a "stucco" effect could be achieved?;) :D :D
 
Dirty Dave said:
The only way that there could be rust underneath, is if there was rust underneath already. If the surface was not properly prepared then that could be possible. but if no oxygen can get to the metal than no rust- The inside of a can of vegitables never rusts, but the outside does.

There is no absolute rust prevention with a steel tub, regardless of the quality of the prep-work. Keep in mind that there are seams all over the place on a Jeep tub, and you won't ever get every bit of rust removed in prepping it (dipping the tub may be the one exception).

The sure-fire way to guarantee no rust...aluminum or fiberglass tub.

Craig
 
Problem with Hot Dip is that the sheet metal is too thin. Typically metal needs to be at least 1/8 and preferably 3/16" or bigger.

The temp of the molten zink is so high that it will release built up cold worked tensions and cause the dipped pieces to warp. There are other dipping processes that might work but hot dip is more suitable for frames.

Unless you start out with a hot dipped sheet that would be formed into a Jeep shape. I think that there are some of the panels and tubs that come out of the philapienes that are this way. It is how they do the YJ and TJ bodies. They can still rust though. Just puts it off a little longer.

Carl
 
Carl,
I guess I should have mentioned that my question was rhetorical, eh?:D

However, You've given me some info I wasn't aware of and I LOVE information.
Yj's and TJ's are Galvanized?? I was under the impression they were E-coated.

Thanks!
Paul
 
Back
Top