1st is white = need to know where to splice - This is the power feed that goes into the relay to power the lights when relay is triggered. In stock form, it was spliced into the parking/tail light circuit (after the fuse so it is protected along with parking/tail harness)
2nd is black = ground
3rd is orange = ends up at fog light but need to know where to splice - In stock form this is the power from the relay to the lights. The wire turned from Orange to Red as it passed through the firewall plug, ran out to the grill shell and then split to the left/right lights.
4th is gray = low beam but need to know where to splice - This wire splices to the solid grey lead on your floor mount dimmer switch harness. It controls power to the switch so that the switch can only close the relay when low beams are on. To have switch activate relay for fog lights in both low and high beam positions, splice or jumper this wire to both the grey and grey with trace leads on your dimmer switch harness.