Doc Savage
Basic User
- City
- Greenville
- State
- TX
Ok not really sure how to describe this other than a stumble. Occassionally at highway speeds I almost think the motor misses, but where I know something is wrong is after running for awhile (good and warm), and I either hit a stop light, or get home and just let it keep running, it will start missing a bit and the rpms drop. If I give it some gas, it will take a few seconds and then smooth out. It will idle normally after that.
I've read of some jet issues doing something similar, but I don't think it is quite the same. In the threads I've see on the dirty jet threads, they say to look down the carb throat and you should see gas dripping. I don't see anything like that. Everything looks fine.
Now here is some info that I think is important. I'll admit that I don't know exactly what I have, but I know it isn't stock now. The previous owner had eliminated the computer and stepper motors on the carb. I'm missing a bunch of stuff under the hood and have tons of "spare" connectors and disconnected sensors. There is no choke, the previous owner did have a manual choke added with a cable. The cable had frozen and today I got around to putting a new on today, but don't think that would impact it after it is warm. The jeep as it didn't have a choke, was not the best to drive in the cold before. You really had to let it warm up before going anywhere. Here are some pics of the carb.
Here is a video of the motor running rough (I was in the cab so showed the tach)
http://vid57.photobucket.com/albums/g201/DocJeep/RCRC%20sale/Scrambler/20151016_210711_zpsbps1p8vu.mp4
Here is a video of the motor running after running into town today. She is real hit or miss with the stumble.
http://vid57.photobucket.com/albums/g201/DocJeep/RCRC%20sale/Scrambler/20151016_210711_zpsbps1p8vu.mp4
I've been running carb cleaner in the gas when I've added gas, and I tried hitting all the orifices I could see in the carb with spray cleaner. When we rebuilt the motor, I didn't do anything to the carb but pull it off and then bolt it back on. I didn't want to change any adjustments or anything, so I held off rebuilding it. Not sure if that should be done or not.
Any thoughts as to what is going on or what my next steps should be.
I've read of some jet issues doing something similar, but I don't think it is quite the same. In the threads I've see on the dirty jet threads, they say to look down the carb throat and you should see gas dripping. I don't see anything like that. Everything looks fine.
Now here is some info that I think is important. I'll admit that I don't know exactly what I have, but I know it isn't stock now. The previous owner had eliminated the computer and stepper motors on the carb. I'm missing a bunch of stuff under the hood and have tons of "spare" connectors and disconnected sensors. There is no choke, the previous owner did have a manual choke added with a cable. The cable had frozen and today I got around to putting a new on today, but don't think that would impact it after it is warm. The jeep as it didn't have a choke, was not the best to drive in the cold before. You really had to let it warm up before going anywhere. Here are some pics of the carb.
Here is a video of the motor running rough (I was in the cab so showed the tach)
http://vid57.photobucket.com/albums/g201/DocJeep/RCRC%20sale/Scrambler/20151016_210711_zpsbps1p8vu.mp4
Here is a video of the motor running after running into town today. She is real hit or miss with the stumble.
http://vid57.photobucket.com/albums/g201/DocJeep/RCRC%20sale/Scrambler/20151016_210711_zpsbps1p8vu.mp4
I've been running carb cleaner in the gas when I've added gas, and I tried hitting all the orifices I could see in the carb with spray cleaner. When we rebuilt the motor, I didn't do anything to the carb but pull it off and then bolt it back on. I didn't want to change any adjustments or anything, so I held off rebuilding it. Not sure if that should be done or not.
Any thoughts as to what is going on or what my next steps should be.
