• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

First scrambler build!

I'll agree with you. And the white wheels were standard with the SR or renegade scrambler package so if you want to say its original , go with your white ones :)

I'll admit I missed your pictures also and must say that's a great great survivor Scrambler you got there :bow: I have the same exact jeep in the same exact year and colors.

Got any pictures of yours? Haven't seen too many in that color combo


 
I was getting tank cleaned up today and adding new parts to it. I'm not so sure about the hoses I ordered. The vent hose seems right but the filler does not. It doesn't have a bell end to slide into the tank. What do you guys think?
ed96aefad4b0a919f7f8a7002eda7cfa-1.jpg



 
759815051abb25b9208f428558d90934-1.jpg


This might give reference of length...seems the filler may be for a 15 gallon tank


 
Last edited:
c7f8ba97408140ca49acca3b18e1f829-1.jpg
84f7805cdde3b4022cb2755a7a33ea97-1.jpg


Axles are nice and clean and ready to go back under frame. All new brakes, seals, one piece axles, ball joints. Etc. they should be good for a while


 
I like your taste in Jeeps.
 

Attachments

  • scout 004.JPG
    scout 004.JPG
    745.5 KB · Views: 204
  • 001.JPG
    001.JPG
    164.4 KB · Views: 204
Just a heads up on the fuel tank. All vendors I have seen say the larger tank is not for Scramblers. I've wondered why about this for years. It seems that the Scrambler rear differential is closer to the tank than on other models and there is a chance under suspension compression that the tank can hit the diff. I plan to try one on my Scrambler. Perhaps with the 2 1/2 in lift it won't be a problem. I hope to test it with full compression to see but that's probably a couple moths away.
 
This 1985 CJ8 had a factory 20 gallon poly urethane tank in it
I have one first sale if interested
e4992c79978c6678ae94645ecb613660-1.jpg



 
I've got the factory Polly 20 gal tank but have 4.5" of lift of should have plenty of clearance. That's interesting though..never heard that before


 
So it's been quite a while since I've been on the forum. Had a really busy year at work and haven't had much jeep time. The guy I've hired to do the body and paint on the jeep has apparently lost interest half way into the job and just doesn't want to finish it. I'm extremely frustrated. I told him I'll be down to pick it up and take it to someone else that can finish it. The tub is painted but still lack the doors, hood, fenders and everything else that is painted. The plan is to get someone else to finish paint and have it operational by spring...I hope. Winter is downtime at work so I should have enough jeep time to make it work. I'm a year into this build and no where near where I should be. Hopefully I'll have something to show for all that money spend fairly soon!


 
I ended up installing a Genright 20 gallon fuel tank which is a 1/8 in Aluminum tank with a 3/16 steel skid pan made to fit a Scrambler. This is a kinda expensive tank and I opted to use the YJ fuel module for the fuel injection 5.3 conversion. The YJ sending unit is also a good choice over the crappy CJ unit.
Merry Christmas to all.
 
So it's been quite a while since I've been on the forum. Had a really busy year at work and haven't had much jeep time. The guy I've hired to do the body and paint on the jeep has apparently lost interest half way into the job and just doesn't want to finish it. I'm extremely frustrated. I told him I'll be down to pick it up and take it to someone else that can finish it. The tub is painted but still lack the doors, hood, fenders and everything else that is painted. The plan is to get someone else to finish paint and have it operational by spring...I hope. Winter is downtime at work so I should have enough jeep time to make it work. I'm a year into this build and no where near where I should be. Hopefully I'll have something to show for all that money spend fairly soon!

This happens so many times. My build is also at the painter. We agreed on a price of $4,000.00 if I was satisfied.
We also agreed I would pay him $1,000.00 after he had it primed and the remainder only after the entire job was finished. He is in his final stages and he is in a bigger hurry to finish than I am. You have to give them an incentive to get the job done. Some may think that is a lot of money for a paint job but this is for a show car quality paint finish and the materials alone were $1,500.00. So that leaves him with $2,500.00. Good ain't cheap.
 
Smart strategy, but in Maryland that IS cheap for a show quality paint job!


 
Well lesson learned. I screwed up and paid half up front. The original cost was $4500. This also included some minor rust repairs on the body mounts and coating the frame. He came recommend by someone I trust...at this point I just want it done and usable by spring


 
Did I mention that for the $4,000.00's I had the car stripped, blasted and on the rotisserie when I brought it to the painter. I had done a lot of the work. Blasting was another $800.00. I also have to put it all back together. I also find that you best not be telling the painter how to do his job, they are artist and have some funny ways sometime. I call mine once a week for a short update, other wise I just leave him alone and I NEVER make it sound like I'm in a hurry or he has a dead line to meet. I want him to relax and do a good job.
 
Last edited:
I've got a local body shop lined up to paint the remaining body parts. Hope to pick up everything this weekend if weather is good and move it to my shop. No point it crying over spilt milk...just want the jeep done. I'd honestly lost interest in it over the summer ( mostly because I was so busy with work) but I'm getting excited again to get my hands on it and at least have it back home...even if it's in pieces.


 
Great news! Good luck and post pics when its done.


 
279abf4f6060bc2c198d91e02d8ac858-1.jpg

Well she's on her way home.... Now where to start? This has really thrown a wrench in plans. Anyone need a project??


 
That's one heck of a nice start. You really need to start your own build thread for this fine project. I don't NEED another project but if you are serious PM me. TN is not too far.
 
Back
Top