• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Flashover604's incomplete build and non-restoration

flashover604

Scrambler Junkie
Lifetime Member
City
Lancaster
State
Oh
Hi all. When I bought my Scrambler I bought it with the intent of having a jeep that didn't look like every other Quadratec catalog Jeep on the road. I wanted simple. Inexpensive parts that you can SEE without having to remove eight plastic covers. Less wires under the hood and dash than the space shuttle. I'd owned a 93 Wrangler and a 78 Cj-7 already, and my cousin had brought back a White with Yellow Stripes SCRAMBLER from California. I loved the look and functionality of it. Well, my cousin died and the Scrambler went to his family in Arizona. Fast forward a couple years and I'd sold my 1979 Snowfighter f250.http://
The hunt was on. Eric (BigWalton) talked me out of a couple that would have been a lot more work than I thought they would be. (Thanks again, Eric!)

After looking for several months I ran across an ad for a Scrambler on Craigslist. 17 miles away, Fiberglas body, 33s, 258-4 speed-Dana 300. The ad had been up less than hour when I pulled into the small wrecking yard car lot. The jeep was "barn fresh", as in, it'd been sitting in a barn for a few years. Half hardtop with a set of ratty hard doors a different color than the body. Busted mirror. No muffler. No brake lights. A set of Dakota Digital gauges with the words worn off. I had numbers, but it took a while to figure out what they all were for! It had a center console that somehow was the only thing the mice had been interested in. Newer Bestop high back seats that had stains of several different colors and a few cigarette burns. The Fiberglas body had seen better days. The bed had a huge crack from left to right about six inches in front of the tailgate. It looks like they put something heavy where there was no support.

I got the key, fired it up, drove a mile down the road in a jeep that sounded like a Peterbilt (remember that "no muffler" part?) turned around, drove back and offered $500 less than he had it listed for. I now owned a Jeep again. I went back home while he got the title taken care of and immediately re-enrolled in AAA Plus. This ain't my first rodeo! My buddy drove me back out to the lot. The title was in a Baggie on the front seat. It was now a pretty decent thunderstorm, so I hooped in, fired it up, and hit the wipers. The drivers side swiped once and launched itself off of the arm to who-knows-where... Crap. I removed the ratty passenger side wiper, put it on the drivers side and wrapped a glove that the mice had had their way with. (nasty) This is when I noticed the neat digital gauge flashing. Apparently when the voltage drops below 12vdc it starts flashing. You know, so you know that your voltage probably wont get you ALL the way home.

I dumped two gallons of fuel in the tank, and away we went. I left the wipers off until a car was headed my way, and left the lights off until the second car flashed me. I wanted every last millivolt I could get. The thunderstorm was kind of a blessing. The cops looked at me when I rolled past in a louder than usual jeep, but they were dry and apparently wanted to stay that way. I pulled in the driveway, thrilled to be there under the jeeps own power. Shut it off, then just for $&@&$ and giggles, hit the key again. Nothing. Nada.

More at eleven...
 
The next morning I went out and did a little sizing up. http://

The alternator belt was way loose. There was also no more adjustment to the alternator, so a new belt was in order. Swapped the belt, fired it up, voila... 14 volts. Next...

One thing that I'd noticed was that the engine was pretty gunked up. You know, that accumulation of oil and dust and various other crap that takes on the look of grease after a while? The carb was pretty nasty too. More on that later, but it wouldn't idle for crap. The idle was turned way up to compensate for this.

The top was on there, but barely. I unbolted the top from the bulkhead and was not surprised when I took the header off and found that the screws into the Fiberglas windshield had pretty much all vibrated the holes into slots. I removed the top and stowed it in the garage for later attention. I took the ratty doors off too. After all, I bought this thing to drive sans top and doors! I'd bought a couple bikini tops off a guy for $50. One regular length and about $18 inches longer but the same color grey. I figure that I could sew the two together for a full length bikini top if I wanted to.

I took a look at the wiring for the brake lights. Two words... Speaker wire. Seriously, speaker wire for the brake lights. I cut the wires before both lights and re-weird them with new wire. Nice, now my taillights were doing what they're supposed to do. I threw the short top behind the seat and headed to the gas station. I knew that I put two gallons in and I didn't expect the car lot to put much in. I expected 13-14 gallons. I was a little surprised when it hit 15, and started looking under the jeep for fuel dumping on the ground at 16. When the pump kicked off at 19.8 I figured I probably have a 20 gallon tank. Or VERY high capacity hoses... I dumped in two cans of SeaFoam and headed back home. I drove it to work the next day, hoping the SeaFoam would take care of the nasty idle problem. It didn't. I also had absolutely no carb response for 0 to 1/4 throttle. It was like the carb STARTED at 1/4 throttle. It jumped and bucked like crazy. Fast forward a couple weeks to my wife's first ride in the jeep. ALMOST home when it started sputtering. I pulled off the road onto a small side street. The carb had fuel dumping out the middle of the body onto the hot exhaust manifold. You know, it's a strange, kinda nervous feeling watching raw fuel boil on the engine... Glad I bought that fire extinguisher. Luckily I didn't have to use it. Sooo... My wife's mom picked her up while I waited for the rollback. (Remember that AAA membership I bought?!?) 1 tow down... Three left... A couple days later I rebuilt the Carter BBD (Ball and Ball Dual Throat I learned). Just for future reference, a Jeep can run with half of the carb full of mud dauber nests and spiderwebs. NASTY looking carb. Two cans of carb cleaner and a rebuild kit later and it fired right back up. I'll be darned, it idles a LOT better without a bowl full of mud and dead insects. Still has a little miss, but it doesn't die at every stop sign anymore. I threw in a new inline filter. The PO put an inline electric fuel pump on the passenger inner fender. I went out to go to work and hit the key but didn't hear the fuel pump. I later found no power to the pump, so I temporarily wired it to a vacant KC daylighter switch.

I took it to a buddy's house. He's got a nice 12,000 lb lift so we got under it, took a good look and made a game plan. The steering was WAY loose. Like a three-four inches at the wheel while the tires never moved loose. We tightened up the AGR steering box and got rid of some of the slop, but the main culprit turned out to be the steering shaft. Two U-joints and a slip joint all worn out equals a BUNCH of unwanted movement. That'll have to be taken care of later. We also found probably a bad drivers side wheel bearing, a loose ball joint and loose tie rod, and a bad dimmer switch. Off to the parts store!

We're back... Pulled the drivers side tire to get to the wheel bearings. Hmmm, this nut isn't supposed to be THAT loose. Tightened up the two huge nuts holding the hub on and look at that. No bad bearing, it was just way loose. No tie rod, no ball joint, so we focus on the headlight dimmer switch. Replaced it, now I have ONE high beam. I took the headlight connector apart, cleaned the spades and reinstalled. Ta-Da, TWO high beams...

Well, that was about it for the repairs that night.
 
Ok... Where are we... Carb is cleaned up inside with new balls and gaskets. Feel free to chuckle a little, I just did. Drivers side wheel is tight. Fuel pump is pumping fuel from a surprisingly large tank unless I forget to turn the fuel pump on. The carb will get you right out into traffic with the fuel in the bowl before it sputters and you remember to flip that switch. Luckily it pumps fast enough to refill the bowl and stay running. Bikini top is on. Tires are ArmorAll-Ed. (Kidding, the car lot did that...) I have high beams, both of them. I've powerwashed it. Twice. It now idles and has a smooth transition from idle to wherever my foot stops. I've filled it up a couple times to check mileage. One tank of highway driving gave me 22 mpg. Another tank of 100 miles of hilly downshift-to-third gear roads gave me 15 mpg. I'm fine with that. These were before I cleaned the carb. I'm curious to see what that does to the mileage. If it goes down significantly I'm just going to fill the carb with mud again...

Now, back to the sloppy steering... I just so happened to see a member here selling steering stuff. A pm and a PayPal payment later I got a package in the mail. It's either a steering shaft or I bought another gun in my sleep. Nope, steering shaft... I'm getting caught up now, as I just put the shaft in today.That old shaft wiggled more than Shakira, but not nearly as good. Two things... One, when you replace a steering shaft make sure you completely remove the pinch bolts from the clamp. Two, no amount of hammering will get those pinch bolts past that little groove cut into splines to accommodate a pinch bolt. This is purely hypothetical, because there's no way I would be stupid enough to think "I'll just leave those bolts in so I don't lose them, after all, I loosened them up a bunch, they should just slide off." riggghhhtt. Look at that handsome rascal...http:// (It's the non-rusty, non-scuzzy looking part. Shouldn't be hard to find...)

I'm not gonna lie to you... I never thought that getting the shaft would make me so happy. This thing drives SOOOOO much better. It no longer wanders the road like a dedicated recycler looking for pop cans... It stays right smack dab in the middle of the road. Possibly best bang for the buck yet. It's nice driving a Jeep that doesn't feel like an old Farmall H.

After my "New steering test drive" I decided to drop the air pressure in the 33" B.F.G. All terrains. I started at thirty psi. I took my daughters sidewalk chalk and colored a four inch swath all the way across the tread then drove as straight as I could for a half mile. The chalk line center was gone but I still had almost two inches of chalk on the sides. I kept dropping pressure until between a quarter and a half of an inch of chalk showing. I'm at 25 psi. I'm using all of the tread and it doesn't ride like a log wagon anymore. Don't get me wrong, your not gonna mistake the ride for an Escalade or anything, but it helps.

After the tire test I decided to get the PB'laster out and go squeak hunting. Seat hardware, any hinge I could find, anything. If it was supposed to move and didn't do so freely it got hit. Now everything moves nice and easy.

When Chiefwaho gets back I've got an order to place. The rear crossmember is gone. Not "rusted so bad it has no structural integrity", but "someone may have yanked it off for scrap" gone. The one at the rear of the tank is Swiss cheesy, and the drivers side frame has some rot. We're going to pull the tub off and replace anything that needs it. The Chiefwaho cross members look like nice upgrades. While I've got the tub off I want to put a sheet of steel under the Fiberglas bed to give it some real support, as well as something to attach the rear seat to other than an eighth inch of Fiberglas.

More to come...
 
I didn't want to mislead anyone. It's not gonna be a complete build or fully restored. I'll be lucky to keep it on the road....

Well done, nevertheless.
I always say mine is a reclamation, not a restoration. As long as you stay 20 feet away and don't look underneath, it looks pretty good. Just like my golf game, I strive for mediocrity.

That is one fine looking steering shaft.
 
Yeah, golf is just a placeholder until I take up shuffleboard.
What kind of shaft did you get? You mentioned eBay.
 
In a complete change of character I'm going to ask a couple questions BEFORE I screw something up. I've been hem hawing around and generally pestering ChiefWaho about his frame plates and rear crossmembers. I've settled on a set of front plates, a set of rear plates and two rear crossmembers. The rear crossmember is completely missing and the next one at the rear of the fuel tank has less structure than almost anything Victoria's Secret sells so if I'm going to replace it, why not do it right, right?

Here's my question. If I lift the tub off of the frame, what tips do you guys have? My buddy has a nice two post lift, so actually lifting it off won't be a problem, but what about all of the wiring? Does the wiring separate at the firewall? I'll have to remove the steering shaft, brake lines, battery cables, etc, but is there anything else to be aware of?
 
The wiring harness will unplug into 2 blocks at the firewall. There's a bolt buried under all the gunk at the center. Don't forget the ground back by the fuel tank.
 
This one- firewall_engharn.jpg

Found, copied, and pasted.:thumbsup:

1. Remove the bulkhead connector by unscrewing the center bolt on the engine bay side. It is a 3/8". The bolt stays with the firewall connector.

2. Once its loose, grab the connector firmly and rock it back and forth and pull on it till it comes loose.

3. It will look like this once pulled.
IMG_3495.jpg


IMG_3496.jpg

IMG_3497.jpg

FirewallplugDetails-1.jpg
 
This. Place. ROCKS! Thanks for the help!


And now today's Scrambler drama... I almost made it home again before fuel issues brought me to a stop on the side of the road. I was heading through town about 35 mph after a 15 mile 60 mph jaunt. All of a sudden it sputtered and then died. I coasted onto yet another side street and started to assess the situation. It was pretty obvious. The electric fuel pump was silent. Not good. Luckily I was literally less than a quarter mile from home. I hoofed it home, hopped in a good vehicle, picked up a Mr. Gasket inline fuel pump from O'Reilley's, and had the Scrambler back in my driveway less than an hour and a half from the time it left me stranded. Again... Oh well. At least I know the fuel pump's good now.
 
I posted up about the MrGasket fuel pump in the "today" thread. That pump isn't the greatest, far from it. Spend the extra and get a Holley or similar.
 
I saw that. It's kinda disappointing. I appreciate the heads up. I'll look into the better ones. Jegs here I come...
 
Money going out... Quickly.

Placed my order for some Kansas steel from one Mister Adams of ChiefWaho fame. I am looking forward to a set of front frame plates, a set of rear frame plates, and two crossmembers. My crossmember at the rear of the fuel tank is shot so if I'm gonna rip and rebuild, I might as well beef it up, right?

Now I'm on the fence on something and thought I'd get your collective input. I want to get a set of rocker guards due to the Fiberglas body. I want a set with a built in step so my wife can get in without the aid of a circus cannon. I'm leaning towards the Poison Spyder Ricochet Rockers mainly because I like the look and they seem to be pretty beefy. I'll have to back it inside with plate steel due to it only bolting through fiberglass. What do you guys think of the PS stuff or do you recommend something else?
 
I had some made locally and i had mine welded to the frame. They don't go any lower than the frame so i have the same clearance. Mine match my Runck bumpers but the guy who made them make any style. I just told him what I wanted. Was well under the cost of buying pre made too.

I have a glass tub as well.


Dain
 
Back
Top