• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Getting a Half-Hard Top, couple ?s

ben8jamin

SOA Member & PROUD of it!
City
St. Simons Island
State
GA
I'm heading down to Daytona tomorrow morning to pick up a half hard top. I've yet to see it, but trust the guy selling it to me (same guy that sold me my 8!). Last time we talked, he said he had one with a sunroof and one without (he was charging more for the non-sunroof one, which makes me think it's nicer). He has a bulkhead too. I've actually never seen a half hard top up close, so I don't know what to look for in terms of condition. Anything particular aside from major cracks, etc? Thanks guys.... I'll post some pics when I get it all setup!:)
 
I would check the mounting hardware built into the back of the top. The mounting hardware that attaches the top to the bulkhead tends to break. I don't think a proper repair would be cheap or easy.
 
also check the mounting hardware at the front (windshield) and ensure you get the metal strip that mounts it. But you need to check to see if the fiberglass is ripped, broken, torn around all the mounting holes...

Truck
 
i'm pretty handy with fiberglass repair, but don't know if I feel like doing a huge overhaul on a top. thanks for the tips guys, i'll keep an eye out for those things. anymore? if I install a rack on top, how much weight to ya reckon it would hold?
 
Got it!

Well I got my hardtop. I'm really happy with it. A 5 hour round trip to Daytona on Saturday produced a nice hardtop (with aftermarket sunroof installed) and a decent bulkhead. I had to replace a little bit of the sheet metal on the bulkhead, but after putting 2 coats of Herculiner on it, it looks fine. I repainted the interior of the hardtop with white semi-gloss Rostoleum and rolled the exterior with Herculiner as well. I installed the bulkhead with stainless steel screws and laid a thick bead of black RTV down as well. I installed the top and drilled holes for the shoulder harness as well. It fits very nice and am very pleased with it. The interior is surprisingly well-ventilated with no doors and the sunroof off.

hardtop4.jpg


hardtop3.jpg


hardtop2.jpg


hardtop1.jpg
 
Last edited:
Forgot Pics

ben8jamin said:
Well I got my hardtop. I'm really happy with it. A 5 hour round trip to Daytona on Saturday produced a nice hardtop (with aftermarket sunroof installed) and a decent bulkhead. I had to replace a little bit of the sheet metal on the bulkhead, but after putting 2 coats of Herculiner on it, it looks fine. I repainted the interior of the hardtop with white semi-gloss Rostoleum and rolled the exterior with Herculiner as well. I installed the bulkhead with stainless steel screws and laid a thick bead of black RTV down as well. I installed the top and drilled holes for the shoulder harness as well. It fits very nice and am very pleased with it. The interior is surprisingly well-ventilated with no doors and the sunroof off.


Sorry guys, I know how yall are pic hungry, as am I. I thought I posted these pics... oh well, here they are....

hardtop1.jpg

hardtop2.jpg

hardtop3.jpg

hardtop4.jpg
 
Back
Top