• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

has any one put buckets in the back?

raser13

Basic User
City
crystal city
State
MO
hey guys and gals, the whole reason i got a scrambler is that i have a 7yo daughter that gets absolutely squashed any time that we have to put anything in the back of our cj5. she is also going to be a tall girl like her mother.(6ft) so her legs are already getting cramped with the small leg room between the top of the seat bottom and the floor. that little bench seat is just to small. at first i was just going to move it over to the scrambler. but then i noticed the legroom issue. i also don't like how small the back is on that bench. it would be horrible in a rear impact. wip lash would be a huge possibility. so now i'm looking at my options. i realize it's a jeep, and as such not inherently the safest of vehicles. but any little bit of extra safety that i can give my daughter, the better my day is.


my scrambler isn't going to be restored any time soon. so aftermarket and add ons are not a problem for me. i'm going to try to make them all as reversible as possible though. so i'm looking at the newer jeep rear benches. they have the higher backs and the three point harnesses for added safety. but they really still suck at leg room. mostly because the newer jeeps have that bed with sink downs for your feet. so they sit really low to the ground. just like the old ones. but i was wondering has anyone put in bucket seats??? they would offer a little more leg room because their tracks are made a little higher. you would pick up the tilt back feature. and they would be cushier on really long trips, which we seem to be doing more and more of. and it would have the bonus of adding sliding back and forth for more storage or leg room depending on what was needed on that particular drive.

i just don't know if they would put you above the bar. i need to make one that goes over the back any how. or if you could fit two in side by side. what say you oh experts of the 8. share your wisdom and ideas with me. pics and drawings of how it might work.

thanks for your time and for looking.
 
I think manhattan did. As did others. Look for the build by manhattan.
 
I don't think a pair of full size buckets will fit between the fender wells.

Sent from my SM-G920V
 
Apparently, the middle set of seats out of an 02 explorer will work. At least ones with a third row of seats. Even adds the stow and go feature. Guess I'll be shopping the junkyards. Thanks for the help guys I hop this helps some one else out.
 
I think manhattan did. As did others. Look for the build by manhattan.

Nope. Just the fold-and-tumble with the integrated headrests...
IMG_2601-1.jpg
 
Nope. Just the fold-and-tumble with the integrated headrests...
IMG_2601-1.jpg

It was the headrests that I remembered. My rear seat had headrests too. But it is now taking up space in the garage.
 
Thanks for all the ideas and pics guys. I'll have to hit the yards and see what I can find. I'm going to focus on trying to find a set of the explorer seats. They seem to be exactly what I'm looking for. But I'll keep an eye out for the newer jeep seats with the higher backs and head rests as a plan b.
 
Here's the original thread on my seat set up. Shows a little better pics for the Ford Explorer seat option.

https://www.cj-8.com/forum/showthread.php?44830-Split-fold-and-tumble-rear-seats!&highlight=

Thanks for all the ideas and pics guys. I'll have to hit the yards and see what I can find. I'm going to focus on trying to find a set of the explorer seats. They seem to be exactly what I'm looking for. But I'll keep an eye out for the newer jeep seats with the higher backs and head rests as a plan b.


Raser13 - Try to find a Mountaineer -- those are leather (not cloth) and might stand up better to sun/rain.
I did 2004 Mountaineer (leather) 2nd row end seats in the back... they fit perfectly between the rear wheel wells.

What is nice about the Mountaineer/Explorer seats is:
- the headrests are actually tall enough to protect against whiplash (the aftermarket YJ/TJ seats with head rests are too low to do any good).
- the headrests are removable so that you can install child seats easily.
- they fold and tumble flat with the CJ-8 bed top (tonneau cover fits over it)
- extra leg room since they sit a little taller


Sitting taller is also the only negative.... passenger heads (adults or children in child seats) will clear the rollbar, but they may not clear an aftermarket cage which would be a bigger problem in a collision (head hitting a rollbar is guaranteed death). But heads do clear the CJ-8 OEM rollbar.

Note that I installed a little differently... I reversed them so the seats face backward and my sons' are protected by the rollbar (a la Subaru Brat/Baja style).
As I'm told, this also makes me legal at Silver Lake Sand Dunes (I'll find out for sure at SandBlast).




P1070757-1.jpg

P1070754-1.jpg


Only the two end "40" seats in the Mountaineer/Explorers with 40/20/40 split second row seating work. The 60/40 seats don't work (unless you want just half a row in your Scrambler).

The 40/20/40 second row seating was put on Explorers/Mountaineers with the optional third row seating.
 
Last edited:
Bestop has a bench seat with the headrest for the CJ. That is what I used. I think I paid around $250 for it.
 
Bestop has a bench seat with the headrest for the CJ. That is what I used. I think I paid around $250 for it.

I have the Bestop rear seat with the headrests as well. It worked while the kids were little. But they quickly grew too tall for the headrest to be effective. And now that they are 16 and 19, no backseat is useful. My CJ is back to being a 2 seater. Yay me!
 
I have the Bestop rear seat with the headrests as well. It worked while the kids were little. But they quickly grew too tall for the headrest to be effective. And now that they are 16 and 19, no backseat is useful. My CJ is back to being a 2 seater. Yay me!

Yeah I figured at some point this will happen with me to. i have a couple years before it becomes an issue.
 
Bestop has a bench seat with the headrest for the CJ. That is what I used. I think I paid around $250 for it.


Those Bestop Trailmax rear seats with headrests look great.. they look factory.
My only concern was that Bestop technical service told me that the measurement of headrest height fully extended was not tall enough to protect a tall adult -- I'm 6'3" and my kids will be tall too as they grow up.
 
Take a look at the CJ back seat made by Mastercraft. It may be an easier fit and do what you want even better.
 
Back
Top