• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Help finding a body shop

rcork

CJ-8 Member
City
Cape Girardeau
State
MO
I've visited every body shop in my area and struck out. Either they want to fill the holes with bondo or its a 2-3 year wait in line. I considered trying to replace panels myself, but I'm afraid I'll spend a year working on it and then have to pay double to have a shop fix my mistakes. So, I'm reaching out to you folks for suggestions. Currently the tub has been media blasted and primed. I also considered a replacement tub, but that seems to bring more problems than solutions.
Thanks,
Robert
 

Attachments

  • IMG_2474.jpeg
    IMG_2474.jpeg
    237.1 KB · Views: 24
  • IMG_2473.jpeg
    IMG_2473.jpeg
    242.6 KB · Views: 25
  • IMG_2472.jpeg
    IMG_2472.jpeg
    256.6 KB · Views: 25
  • IMG_2471.jpeg
    IMG_2471.jpeg
    244.9 KB · Views: 24
What are your goals for this build? Are you looking for a perfect original metal restoration, or fun machine?

If you pay someone to patch that tub, it would likely cost more than a replacement tub (which have issues of their own). I have replaced the floor pans, flare around rear wheel opening and rust under "Jeep" lettering. It is a time consuming process.

Price replacement panels from classic (or other sources) to get a realistic idea of repair costs.
 
My goal is to have a fun jeep I can drive around. I've had this jeep for almost 30 years and my buddy had it before me. I was heading down the path of just replacing the panels with replacements from Classic Enterprises. But, at some point I remember reading one of the build threads here and thinking man that looks like a skill I lack. So I've left it sit in a spare garage for too long. Ideally I could find a shop who has done jeeps and isn't half way across the country.
 
I've have a buddy that does body work and is familiar with CJ's. He is near Afton, OK.

He is currently working on a CJ7 for me and has done other CJ's projects for us in the past.

We have a Scrambler that is inline after he completes the CJ7

If you'd like his contact information send me a personal message on here.


1582223973007.png1582224001378.png
1582224045050.png

1582224072505.png

1582224101223.png
 
Try a hot rod shop near you. Most body shops want to do insurance work. Most hot rod shops tend to not do insurance work.
 
You might try cutting out the bad and cutting new metal to fit the holes and find a welding shop to do the welding for you. If they weld and grind it, you could do the light coat of body filler to smooth it up, or take it to the body shop that does bondo and let them finish it. I got one of my Scrambler projects ready for welding and took it to the local muffler shop and paid them per hour to weld it for me.
 
Collins Bros in Dallas does very nice body and paint work. They aren't cheap but you get what you pay for. Also Mike Jewel of Austin Jeeps does some nice paint work and may be a little more economical than Collins Bros. Have seen one Jambo that he painted and it was very nice .
 
Back
Top