• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Help needed with SOA charity project

1x1_Speed_Craig said:
WildTurkeycj8 & TexasAg77 - Are these Omix replacement hoses? If so, I have the same ones on my Scrambler. They didn't fit until I found a late-model Scrambler fuel filler nozzle, which had tubes ~4" longer than a typical CJ fuel filler nozzle. Let me know. Ed - Just hold onto them for now, if you can.

That would probably work fine. Mine is an '81, and I'm pretty sure the tubes are shorter ones.

-Mike W
 
WildTurkeycj8 said:
That would probably work fine. Mine is an '81, and I'm pretty sure the tubes are shorter ones.

-Mike W

Bingo. My previous fuel filler nozzle was also from an '81 Scrambler (too short).

Craig
 
Scrambler Parts

I have a new, never installed, tail gate and a dash complete with the original gauges. I will happily send them or bring them to the National Event if you can use them.
 
my tailgate that i was donating is a little beat up...urs may be a better setup for the project
 
Gscram said:
I have a new, never installed, tail gate and a dash complete with the original gauges. I will happily send them or bring them to the National Event if you can use them.

Excellent, Gscram...we'll take it. I'll talk with Lee. The National Scrambler would work out best for big items...I just need to make sure it's not going in for paint before then. I'll touch base with Lee (FELNTPSY).

Scott - Could we still get your tailgate hinges?

Thanks,
Craig
 
99% sure I have a wide track front axle (wheel to wheel). The only catch is someone would have to pick up in KC as I started a new job and chances are I wont make to the Nat. Scram. Ill try to post pic later
 
CrazySchaefer said:
99% sure I have a wide track front axle (wheel to wheel). The only catch is someone would have to pick up in KC as I started a new job and chances are I wont make to the Nat. Scram. Ill try to post pic later
CrazySchaefer I am about 2 hours South of KC on Hwy 169 (Thayer) If they need your axle for the SOA Project maybe we could make arrangements for me to haul it to the National Scramble. Do you ever go to K-Rocks? (down by Ft Scott) http://ksrockspark.com/ Maybe we could meet there and go wheeling sometime. I think a few of us are going either April 23 or 30, let me know if you are interested (PM me).
 
C'mon guys...please...

We REALLY need help from a volunteer & coordination standpoint (marketing, Charity Coordinator & sponsorship). While pretty much everyone here thought the project was a great idea, there are only a small handful of people currently doing all this work. I can lend support to anyone looking to fill these roles, but cannot handle all of the coordination myself.

The deadline for this project is now only a little over 13 months away, which (as many of you know from your own Scrambler projects) isn't very long for a ground-up build.

Please help out if you can. You can PM me, or e-mail me at project@cj-8.org.

Craig
 
Not to step on Craig's post here,

But what we need is a couple of folks to help coordinate the project hand-off's....you don't necessarily need to be involved in ACUTALLY delivering items or transportation, but phone calls, emails, and keeping track of what has been done and what needs to be done.....

HELP KEEP THIS THING ON TRACK! This is an opportunity to give back to the SOA and this .com forums what it has given to you!

So, who wants to step up to the plate...We promise that you will have full support of the Board and other members that are already helping donate time and effort.......it's all about many accomplishing small tasks to complete a large project....this will flow easier that way and have a large group of the members have a "vested" interested in making this project complete by the deadline!

We are counting on everyones enthusiasm to remain consistent!

LET's DO THIS! :D
 
CrazySchaefer said:
99% sure I have a wide track front axle (wheel to wheel). The only catch is someone would have to pick up in KC as I started a new job and chances are I wont make to the Nat. Scram. Ill try to post pic later
If CrazySchaefer's offer still stands and his FRONT WIDE TRAC AXLE is needed for the SOA charity project. I would be able to hual it to Hot Springs, but I would need to make arrangements with CrazySchaefer for my brother to meet with him in the KC/Leavenworth area THIS WEEK so he could hual the axle back to me in Thayer. (he has access to a truck THIS WEEK ONLY)
 
CHIEFWAHO said:
If CrazySchaefer's offer still stands and his FRONT WIDE TRAC AXLE is needed for the SOA charity project. I would be able to hual it to Hot Springs, but I would need to make arrangements with CrazySchaefer for my brother to meet with him in the KC/Leavenworth area THIS WEEK so he could hual the axle back to me in Thayer. (he has access to a truck THIS WEEK ONLY)


CHIEFWAHO - I think we're set on the front axle. A semi-local shop here in Michigan found one and is donating it to the project (along with rebuilding the front/rear axles w/new seals & bearings). If something should fall through, we can probably round up what we need. I definitely appreciate the offer to help, though.

BTW, an updated parts list (reflecting this axle sponsorship) will be posted tonight when I get home.

Craig
 
Sorry Yaaahaalll IM in Lueasiaaannna!!!
Well anyway what i was saying is I wont get home until the 8 of MAY so this weekend is defenitly out. If someone could measure a widetrack front end it would greatly help so I could have my wife go out and measure the one I got. I appalagize for not getting back sooner but I have been real busy.
PS yall tolk kinna funnie don haer!!!!!
 
Back
Top