• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Help! Weber carb 2nd stage flat spot..

I checked mine and I had between 4 and 5 lbs at the carb but with the by pass fuel filter the Weber ran fine. One thing I did find out is that the fuel filter needs to be laying flat and the 1/4" by pass hose needs to be turn so that it is on the top and the fuel line to the carb is at the bottom. This little things make a difference.
Another potential problem is if your fuel tank vent is plugged or if the charcoal filter has been removed and the fuel tank no longer has a way to vent it could lead to added pressure in the carb because now the by pass line on the fuel filter is not allowing the extra fuel to return to the tank.
 
Last edited:
Bought the same carb ( hate it )
Carb is only surposed to have 3lbs fuel pressure,stock pump puts out 5lbs, so you need a regulator and a gage and not just any regulator. I called Webber tech support they were very helpful
Good luck

Interesting, can i sound like a doctor and ask what symptoms yours was showing when getting too much pressure?
 
I checked mine and I had between 4 and 5 lbs at the carb but with the by pass fuel filter the Weber ran fine. One thing I did find out is that the fuel filter needs to be laying flat and the 1/4" by pass hose needs to be turn so that it is on the top and the fuel line to the carb is at the bottom. This little things make a difference.
Another potential problem is if your fuel tank vent is plugged or if the charcoal filter has been removed and the fuel tank no longer has a way to vent it could lead to added pressure in the carb because now the by pass line on the fuel filter is not allowing the extra fuel to return to the tank.

I have binned that 35 year old charcoal filter and installed a vented gas cap instead but i cant imagine it would prevent the fuel running back down the return line.
Easy way to test that though is pop the gas cap off next time i start it up and see if it makes any difference.

No updates as i still haven't had chance to mess with it yet, work is mayhem at the moment and cutting in to my Jeep time.... Not Good
 
My carb would fall flat on its face when I stepped on the gas, wouldn't run on a hill, adjusted float several times I have elemented return line to tank ( which ment just changing inline fuel filter, run my fuel pressure at 3lbs for the road and rock crawling at 2-1/2 runs ok at those pressures . ( going to rebuild my motor raft 2100 much more power with that ) or maybe try the Howell fuel injection on the parts jeep I have
 
Just an update to this in case anyone else is searching for Weber issues...it was the gas.
I got the tank down to less than quarter full and threw 3 gallon of fresh petrol in there and after running it around for 20 minutes it let me floor it without coughing,spluttering or stalling!.
So the engine would start and run fine on the old gas but try and give it too much and it couldn't burn it , one for the chemists to explain i think!
Thanks for the help guys especially Dennis!, hopefully it will be fine from now on.
 
Glad you got it fixed. Not surprised about the bad gas. I only buy premium grade fuel all the time these days because everything I own seems to run better on it and I seem to have much less trouble using it. I pay more per gallon but I get better fuel mileage and I'm sure it's better for the motor too. Oh, did I mention I buy Sea Foam by the six pack.
 
Back
Top