• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Hookin up a new tach

Grey Fox

SOA Member
Lifetime Member
City
Bountiful
State
UT
Help me with wiring up a new tachometer. I bought a new tach that will work on 4,6 or 8 cyl engines. I have a new wiring harness from Painless. I have a HEI distributor on an AMC 360. I thought that I would find a wire under the dash labeled "tach".....Nope. What do I hook this to?
 
There should be a terminal on the HEI distributor labeled "tach". That's what you want.
 
Thanks John, I found the output term on the Distributor, connected it to the tach while holding it in my hand over the engine and its works. There was a wire connected to that terminal and it go's to the termination block that passes through the fire wall into the interior. However under the dash I can not find a wire label for the tach. Again this is a new wiring harness with new labels for everything and well marked. I'm just surprised there isn't a tach wire under there. I'm sure its behind the dash, just have to figure a way to trace it through the fire wall connections. If all else fails I'll run a new wire from the dist to the tach. Again thanks for info. Kim
 
Grey Fox said:
Help me with wiring up a new tachometer. I bought a new tach that will work on 4,6 or 8 cyl engines. I have a new wiring harness from Painless. I have a HEI distributor on an AMC 360. I thought that I would find a wire under the dash labeled "tach".....Nope. What do I hook this to?
Will this after mkt tach work with the wiring harness of the tj 4.0 I had installed in my 83 cj8 the wiring harness has one for tach?Thanks
 
scr83jp, Not sure if your asking me or John this question. I know I never could find a tach wire so I ended up running a new one from the dist to the new tach. The tach I bought had dip switches to select for 4,6 & 8 cyl applications.
 
Back
Top