• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

In Tank Fuel Pumps

I ran this in mine. I am running a stock GM TBI unit/computer, so it has the OE style TBI Walbro fuel pump.

https://www.tanksinc.com/index.cfm/...duct_id=84/category_id=61/mode=prod/prd84.htm

You do need to cut a fairly large hole in the top of the tank. When done the top flange has the pressure line, return line and a rollover valve/vent. I plugged the factory CJ outputs/vents and used the stock CJ sending unit. Approaching 7K miles in 2 years with this.
 
Been researching this company and their approach to in tank fuel systems. A few you tube vids as well. Really like their product and the cj tank has flat top room for this install. For my FI CJ5, I modified/enlarged the existing cj tank sending unit opening an used an early YJ 4cyl FI sending unit. Never solved the fuel tank gauge level opposite read issue with the yj unit. But it works well for me...but will go another route with the 8. Most likely with the above.
 
I built mine using a CJ and XJ sending unit with an XJ pump. Been working for years.

010.JPG12.JPG
 
I will post some pics below. You can use the pickup as the EFI return and just do half of this. You could probably just use the factory sized lines as well.
 

Attachments

  • 01.jpg
    01.jpg
    121.2 KB · Views: 19
  • 02.jpg
    02.jpg
    108.8 KB · Views: 20
  • 03.jpg
    03.jpg
    96.8 KB · Views: 21
  • 06.JPG
    06.JPG
    112.6 KB · Views: 23
  • 05.JPG
    05.JPG
    124.8 KB · Views: 21
  • 04.JPG
    04.JPG
    103.2 KB · Views: 20
  • 07.JPG
    07.JPG
    107.4 KB · Views: 20
  • 08.jpg
    08.jpg
    121.2 KB · Views: 20
  • 09.JPG
    09.JPG
    99.6 KB · Views: 20
  • 010.JPG
    010.JPG
    130.9 KB · Views: 20
  • 11.JPG
    11.JPG
    133.7 KB · Views: 20
  • 12.JPG
    12.JPG
    143.5 KB · Views: 19
Back
Top