• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Is it necessary

jeepmonkster

Scrambler Junkie
Lifetime Member
City
Spiro
State
ok
Not knowing allot about the CJ Fuel system, is all this in the red box necessary, or is there an alternate system. All my existing parts in the red box are worn out, some missing. Just asking.
 

Attachments

  • CJ Fuel return.png
    CJ Fuel return.png
    162 KB · Views: 211
  • CJ Fuel return.jpg
    CJ Fuel return.jpg
    95.5 KB · Views: 191
If your area does emissions testing you may need parts of this.
Also, if you rollover, whether fourwheeling or just going to the grocery store, that rollover check valve keeps fuel from spilling out when you're upside down.
 
Is it necessary? Not entirely, though when it fails, either through being obstructed or open to the environment, it results in the gas tank being unable to vent which can restrict fuel pressure (obstruction), or powerful gas fumes in your garage (if open to environment).

Delorean motor company has a replacement for the rollover valve; while the liquid check valve is next to impossible to find a replacement for. Some times you can salvage what you have with the LCV since it's made of plastic. The rollover valve is metal and usually long gone, but the DMC replacement is plastic and should last longer.

The rest is just pipes and hoses.
 
I have used the DMC valves before and they work great. They are from a pile of NOS left over from DMC and used to be around 10 bucks and then once the jeep people found out about them they are about $18 IIRC, and are still available (as of a few months ago)

Kayak, what are you asking for these?
 
I have used the DMC valves before and they work great. They are from a pile of NOS left over from DMC and used to be around 10 bucks and then once the jeep people found out about them they are about $18 IIRC, and are still available (as of a few months ago)

They may not last long if DMC is in fact resurrecting the Delorean. As I remember they have a whole Raiders of the Ark sized warehouse of parts to serve as replacements. Are they really thinking of making those parts into complete vehicles?

thumbnailImage-1.jpg
 
I am running one of the MTS fuel tank vent/rollover check valves on my '84 CJ7. Not correct if you are looking for OEM or a 100% accurate restoration, but it works well and is a much simpler design than the original system found on the 15 gallon fuel tank equipped CJs. Found mine on eBay for under $50. I will be using a few more of them on some of my other CJs.

6cc92220c5d5d9d2d35429ca50b645e4-1.jpg





Sent via smoke signal
 
Thanks CJ-oholic. Looks like a great fix. I will get one ordered. Many Thanks
I am running one of the MTS fuel tank vent/rollover check valves on my '84 CJ7. Not correct if you are looking for OEM or a 100% accurate restoration, but it works well and is a much simpler design than the original system found on the 15 gallon fuel tank equipped CJs. Found mine on eBay for under $50. I will be using a few more of them on some of my other CJs.

6cc92220c5d5d9d2d35429ca50b645e4-1.jpg





Sent via smoke signal
 
WOW! wait a minute. I got to looking at this thing on ebay I thing it is just crown automotive part# CROJ5360058, a dishwasher drain adapter, and a brass hose barb tee.
All parts are arount $16. I think I will make one.
 
Kind of hard to see, but the only thing I'm missing in the way I did mine is the check valve

b1ef12b4a384e4d78542a10fe7817ced-1.jpg



 
Not knowing allot about the CJ Fuel system, is all this in the red box necessary, or is there an alternate system. All my existing parts in the red box are worn out, some missing. Just asking.

I deleted my liquid check and rollover check when I did the YJ tub swap on my '84 CJ. They were both rusted beyond repair. The Jeep ran just fine with them bypassed, but I recognized I was risking a fuel spill in the event of a rollover. (When I built the Scrambler though, I installed an OEM 20 gallon tank, which has them incorporated into the tank. FWIW.)
 
I was kidding really didn't mean to put you on the spot. I only have one extra LCV to my name. A box of ten is impressive ! :bow:
 
Forgot about this thread. Pic for proof, I was off a bit. 7 not 10.
0b2c616abd8b7c925b74b682d24f6935-1.jpg



 
it's an old thread but...

Anybody got a reason why the CJ could not use the YJ setup. This eliminates the CJ style LCV and ROV and replaces with a single unit.

MTS supplies aftermarket parts i.e. JLCV-1 but the MOPAR partnumbers still work, for searching try.
Part No.: 53004047 CONNECTOR-VENT TUBE TO ROLLOVER VALVE
Part No.: J5360058 VALVE-FUEL TANK ROLLOVER SAFETY

Check out fig 14-3200 of the YJ parts manual
 
Back
Top