• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Nos vs aftermarket windsheild seal

BRKLYNZ28

Scrambler Junkie
Lifetime Member
City
BROOKLYN
State
NY
I took these last week as i was doing some organization . I never seen a picture on here of side by side comparison. .
d889ecb7ce59c81e806c4630a5562dc8-1.jpg


To the left is a used oem gasket i took off a 80k mile 7. The middle is a real nos still in the bag and the right one is a aftermarket omix seal.. [emoji33]

Sent from my SM-N910P
 
The one on the right from what I remember looks similar to the one (another aftermarket) that I went to use. It fit but I would never get the windshield frame into position to seal the door. Ended up using the original and chalking the flap part on the outside to the windshield frame.
 
Nice comparison. Omix was thinking bigger is better. If the rubber was less dense and would compress it might have worked. I had to cut mine down to let the windshield move back to the correct position.
 
A friend that works at a 4wd shop advised me to go to the local Jeep dealer and order one, that is what they do. They come from Jeep and appear to be oem style and are packed in Jeep labeled packaging. I used one on my Scrambler and it worked well.
 
A friend that works at a 4wd shop advised me to go to the local Jeep dealer and order one, that is what they do. They come from Jeep and appear to be oem style and are packed in Jeep labeled packaging. I used one on my Scrambler and it worked well.

Really? Wow, I am not being sarcastic here but I would never have thought of getting CJ parts from a Jeep dealer.
Like i said on the other thread it's those ends that ruin the omix deal. I cut one down like Kim said but then the screw hole counterbore was gone
 
My dealer doesn't have the books to order anything before 1996


 
Anyone try one of these yet?

http://www.ebay.com/itm/Jeep-AMC-CJ...ash=item3f52280fb6:g:6YoAAOSwMmBV039C&vxp=mtr

This is a brand new US Made Cowl rubber for the 76-86 CJ5, CJ7, and CJ8. This is not China, India, or Taiwan made hard rubber junk. This is the correct spongy style rubber just like the OEM style. These fit great and we have quite a few calls for these particular brand seals. These do not come from the normal jeep parts supply warehouses that everyone and their brother buy from. These are at a great price because we purchase them in bulk and can sell them at a crazy low price. QTM Parts

$25.00

cowlseal.jpg
 
It will be interesting to see. The description sounds promising. I panicked and got a NOS one from JJ in case I need it for my windshield swap. It is smooth, supple, and very compressible :thumbsup: Let the hoarding begin!

IMG_2433.JPG
 
Anyone try the replacement windshield cowl seal from Steele Rubber products? I believe all of their products are made in the US. The cowl windshield seal lists for about $46 on their website. Curious how their quality and fitment is compared to the other aftermarket companies. They also offer most of the other rubber weather stripping pieces for our CJs.

http://www.steelerubber.com/

Wish there was another source for the rubber shift boots. I can't seem to get a crown/omix shift boot last for more than a year or so on my T5 equipped CJ7. Guess that is what I should expect from crown and omix-Ada though. I have yet to see them product any sort of quality part.


Sent via smoke signal
 
A NOS T5 boot will be in the mail shortly for the incredible help you have given me in the past and the future during my road trips. [emoji482]
 
I got my chrome paddle door handles from a jeep dealer a few years ago... Apparently they have/had a boatload in a warehouse in Canada.
 
I got my chrome paddle door handles from a jeep dealer a few years ago... Apparently they have/had a boatload in a warehouse in Canada.

I'd love to have a set of those instead of the cheap Shitz we get now.
 
A boat load.. hmm some need to import amall of those...

Sent from my SM-N910P
 
To be fair, he didn't qualify the size of said boat and it was five years ago.
 
Back
Top