• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Not a complete build, but info for anyone needing a full floor replacement

certifiablejeep

Definitley Certifiable
Lifetime Member
City
Bedford
State
NH
I was able to get my hands on a Keyparts full floor section for a CJ5.
It has the 2 front mounts under that normally the older style full floors did not.
So far, impressed with the quality of what I am seeing.
Only thing so far I see is that the opening for the transmission tunnel cover seems to be the newer style (larger) vs. older style.

20240304_161527_resized.jpg

This is a T150/Dana20 cover on top... just for reference.

20240304_163919_resized.jpg

All in all, impressed over ones I have used in the past.

I imagine the CJ7 and CJ8 ones are similar, I just happen to get this CJ5 one in.

cb
 
Must have been set up for the later CJ-5s in the 80s. Nice metal with caged nuts.
 
Must have been set up for the later CJ-5s in the 80s. Nice metal with caged nuts.
Overall it is pretty similar to what you see under the CJ floors... the detail they put into it is very impressive.
It isn't exact and some of the stampings might be a little more round on the floor details, but the holes/floor impressions/etc. are all very close.
Much better than what had been out there.

cb
 
Back
Top