• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Oriental Red Original Paint refresh with NOS

Loaded up spare tire carrier and brackets and the NOS Brushguard with Warn 8274 Center....

and dropped them off at powdercoater.

Here's a poser shot of the brushguard hanging from 83 Sebring modified rear bumper.
Gosh I sure hope I don't get carried away... Someone knock me in head IF I start modifying 82 Oriental.

photo1023-1.jpg


Going to do some more polishing after work, ran out of Groits Garage machine polish #1 and more just came in.

Is that center hoop tall enough to reach from the Warn 8274 winch mount to the top brushguard bar? It looks shorter then the one pictured below:

https://www.cj-8.com/forum/showthread.php?t=31651

Just curious, but in your picture it looks too short:shrug:


Never the less, very jealous of the brush guard :-)
 
Last edited:
How much was the powder coating? I can't wait to see the brushguard when you get it back. I may powdercoat mine as well before I mount my 8274.
 
Karate Kid

That's the center for Warn.... I sure hope. :fingerscrossed:

Funny I had NOS Brushguard with what I thought was Ramsey Winch center and traded to Jeep Addict. Also traded him the Jeep SE 8274 Warn mount.

Don't know how much powdercoating will cost yet, usually not too expensive.
I like the way semi-gloss powdercoating looks.

Didn't drop off the Warn 8274 mount yet, going to see if I can figure out factory looking way to mount factory tow hooks with brushguard. Will probably be a combination use one bolt hole, weld the hook on kinda deal.
----------------------------------------------------------------------------------------------------------

Feeling like Karate Kid wax on wax off. More like polish on and polish off, haven't applied wax to anything but dash yet. The 6" random orbital and 3" random orbital with the foam pads do great work. The 3" really gets all the small areas like door jambs, windshield frame etc... Variable speeds so don't mess up. I've gotten good with them and running full speed most of time. Actually a great workout and stress reliever after work. Although my out of shape body is telling me to slow down.

After I get the whole Jeep with same shine with 1,2,3 grit polish, then use paint ready wash and touch up the scratches.... the final wax will be incredible.

I don't think the PO ever waxed the Oriental, don't find any wax around hinges etc. Which I guess is good as there is no thin paint spots anywhere on Jeep.

photo1020-1.jpg

photo808-1.jpg


---------------------------------------------------------------------------------------------------------

Used my pnuematic die grinder with 2" round brush to knock off old loose paint and dirt along the lower edge of windshield frame.

Painted POR 15 on few places on windshield frame that paint was missing and on the clock & tach holes.

What an INCREDIBLE DRY Origional paint windshield frame !!!

Haven't polished the windshield frame yet. That's tonights therapy.

photo379-1.jpg


photo2193-1.jpg
 
Natta

Thanks for compliments really does help to keep motivated.

Glass comes out easy, it's the going back in that I don't try.

I am using a new rubber windshield gasket. The origional one has black silicoln around the outside edges and inside and not worth trying to clean up.

Well..... wife handed me our sick 2 year old and I went to bed super early last night.

Think my back and arms & eyes ... needed a break from the polisher anyway.
When looking at an object it would start going round and round. :crazy:


Here's a picture of my Red's touch up paint's.

I may have to paint either the Gladiator or Jeepster Convertible "Trans Am Red" and the other one President Red.

What other shades of Red did AMC Jeep offer? I don't consider Garnet a red...it's burgandy.

photo1301-1.jpg
 
that's a cool looking rear bumper, never seen that style before (embedded lights, roller fairlead, receiver hitch, and pretty factory looking).. did you build it?

You need to see this thing in person. It's just pure awesome from the NOS 8274 in the front to the solid stainless exhaust and the winch bumper contraption in the back. Don't let him crank that 401 in it. You'll think you're at the Daytona 500. This thing rocks!:cheers:
 
83 Modified

that's a cool looking rear bumper, never seen that style before (embedded lights, roller fairlead, receiver hitch, and pretty factory looking).. did you build it?


I built the bumper's in about 1999 era.
Rear bumper wraps around and winch is tucked underneath with remote freespool U Joints.
I can post more pics if U would like.

Hope to get lots done this weekend.
 
I built the bumper's in about 1999 era.
Rear bumper wraps around and winch is tucked underneath with remote freespool U Joints.
I can post more pics if U would like.

Hope to get lots done this weekend.

please post more pics of the bumper! looks AWESOME!!!
 
Another great RED Jeep Dennis!

You really do have Jeep RED paint running thru your veins! :cheers:
 
Can't wait to see final pix!!!

My paint code leeds me to believe I have oriental red, but it looks day and night from this one (I have grey laredo stripes).

KK
 
Sat & Sunday

Got lots of polishing time this weekend.

Crazy :crazy: but I spent most of day Sat ..... just on windshield frame. :drool:

I have learned lots about this waxing & polishing:

1. U can tell when have enough polish on the paint when it's real easy to remove next coat.
2. Sometimes that's 8 to 10 passes of just polish.
3. There are 3 grits of courseness polish.
4. Foam pad gets clogged after 2 passes & need washing, so need lots of foam pads on standby.
5. Foam pads must be 100% dry (no water moisture) or the polish is hard to remove.
6. The 3" machine gets into hard to reach places, but doesn't have as much power and is way slower than 6" machine. 3" also gets very hot, so I let it cool and apply polish by hand to the hard to reach areas.

photo536-1.jpg


photo571-1.jpg
 
I just finished working on polishing my windshield frame a few weeks ago. I too have become a semi-pro polisher. :crazy: It's worth the effort.:thumbsup:
 
One major contributor to this 8s great original paint condition is the fact that its a non-clear cote color....which means that with some careful polishing, a little red comes off leaving some nice red underneath.... I saw this Jeep in person last month and even without the polishing it was incredible. Keep up the great work! :thumbsup:
 
Still polishing

I just finished working on polishing my windshield frame a few weeks ago. I too have become a semi-pro polisher. :crazy: It's worth the effort.:thumbsup:

Windshield frame is hardest part of Jeep to polish and seems like there is more bug stains there than anywhere.
 
Still polishing

Quote:
Originally Posted by bobbysjeep
I just finished working on polishing my windshield frame a few weeks ago. I too have become a semi-pro polisher. It's worth the effort.

Windshield frame is hardest part of Jeep to polish and seems like there is more bug stains there than anywhere

One major contributor to this 8s great original paint condition is the fact that its a non-clear cote color....which means that with some careful polishing, a little red comes off leaving some nice red underneath.... I saw this Jeep in person last month and even without the polishing it was incredible. Keep up the great work! :thumbsup:

Thanks Eric, working on your new Overlander & the Jeepster at Milton's sorta gave me inspiration to make this 82 just like new again.

Careful polishing in right, I would never let just anyone polish 30 year old paint.
CJ's have alot of edges that someone could rub paint right off in split second with big 6" machine polisher.

------------------------------------------------------------------------------------------------

Been polishing away and ordered 200 bux more in 3M polish and polising pads.

Got windshield glass installed and found a NOS windshield to cowl weatherstrip:

The reproduction cowl weatherstrip looks nothing like the original and is made with different kind of rubber that doesn't seal.

photo347-1.jpg


photo1974-1.jpg
 
holy cow - nice jeep. all original and clean. no abuse, no waste, just mint original paint. no over the top liftkit either. take good care of this baby...
glad you got this one, denis, .... red jeeps belong either in your garage.... or in mine....
keep the good work up! as usual :-)
 
World's best Jeep builder

holy cow - nice jeep. all original and clean. no abuse, no waste, just mint original paint. no over the top liftkit either. take good care of this baby...
glad you got this one, denis, .... red jeeps belong either in your garage.... or in mine....
keep the good work up! as usual :-)

Man that is a super compliment .... & most encouraging from the World's finest Jeep builder!

From your journey across USA.

DSC02634-1.jpg


And couple pics of rear winch bumper of the modified Scrambler.

I like original so much better than modified.

image0012-1.jpg

photo1058-1.jpg
 
Last edited:
Back
Top