• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Oriental Red Original Paint refresh with NOS

Collection

So do you have a picture of the whole collection together?
 
More work

So do you have a picture of the whole collection together?

Sure wish I could post all together...that would mean I had finished my planned work...but would also mean I was near retirement. :ZZZ:

The Gladiator is all apart ..... and Jeepster (needs restoring) and J20 are stashed away at different buddies shops.

I won't have room until 2nd shop is built. :fingerscrossed:
 
Finished polishing

Well not quite finished polishing, (but I'm tired of wax on wax off) got the normal outside all finished and it looks incredible.

There is 8 coats of wax on entire outside. Dust can't even land on Jeep without sliding off.

I've polished the interior & underneath hood a few times, but still needs lots more hours to get funk off and make shine.

Polished some on the bed but only by the tailgate.... in the tire carrier areas.
Probably 20 more hours of polishing left to do ... in bed alone.

So anyway.......time to treat myself...change pace.... and started installing some NOS parts:

photo1131-1.jpg

photo1909-1.jpg


Since will be installing NOS Clock & Tach the Speedo cluster face won't be as vibrant bright of orange so had to swap the face.
Plus the backside of speedo glass needed cleaning ;)

photo265-1.jpg
 
Digging

Been digging

Hard to find OEM vent cable controls.

Original ones worked great and handle's aren't even loose. Dunno why the chrome base turns black over time.

photo201-1.jpg


AMC Speakers with cloth that wears like iron. Both of original speaker's still work great...well as good as speaker quality was in 1982. ;)

photo1276-1.jpg
 
This thing will look show room floor new when you're done. Probably one of the best originals left.:cheers:
 
Using up NOS

So you're even doing NOS speakers then?

Yea the CJ speakers have the correct plugs (as pictured) into factory radio harness.
The PO had installed a aftermarket cassette player, but thank goodness he didn't cut the dash and the Jeep must of had factory AM/FM as the antenna is in correct spot!
One of my biggest pet peeves is antenna in wrong place.
I have the template that came with the pictured NOS antenna if anyone needs for restore.
Anyone notice the paint behind the antenna?

Also ...Most modern speakers don't have a flat mounting surface and therefore leave a gap that is visible to driver and passenger. I dunno what kind of cloth that the factory used but it holds up well to Jeep environment for 30 years.

I'm going to be using up a bunch of high end, desireable, hard to find...expensive... NOS stuff on this refresh, IMO .... it's the only way to improve this Jeep.

Although it really didn't "need" to have any of this stuff.

Just making a Scrambler be all it can be. :woot:

What the heck ... Only go around once. :cheers:
 
People are looking for the proper stock antenna placement all the time, and though sometimes it ends up being a religious discussion that template will be really handy!

I will be looking for it when I get to that point w/ mine.
 
Nos

This thing will look show room floor new when you're done. Probably one of the best originals left.:cheers:

Thanks Tommy, U have some nice parts and Jeeps.
I think you're going to have almost as many Scramblers as Whao's from KS.


Been digging and found some more goodies. :woot:

I really should be selling this stuff instead of using it up...but this Scrambler is worth it..and I like to know the NOS parts I hunted and dug from treasure troves ...went to a good Jeep.

Not sure what exact year that Jeep switched to the pictured "Quartz" style clock.
However the Quartz clocks last so much longer than the first AMC Jeep version clock.
I've had a NOS quartz clock running constantly for 10 years in my modified Scrambler.
The pictured wiring harness is factory correct way to add clock & tach... plugs into the fuse box, and then the tach plugs into harness also. Lights on clock & tach dim with rest of instruments on the dash.

Also thanks to 82nd for the rubber coated footman loop and silver hood latch & catches.

I'm still missing a few necessary parts that I think I've either sourced or know I've got them somewhere in my mess.

Hope to get the dash finished & back together and get back to polishing the interior floor this weekend.
Watching the random orbital buffers is really making my head spin, :crazy: been a nice break digging for parts.

photo2147-1.jpg


photo629-1.jpg
 
Dennis, your stash of parts never ceases to amaze me! Definitely one of the nicest originals I have ever seen, and with it in your hands it is only getting better. I'm exhausted just thinking of all the waxing you have done so far! Keep up the great work! I would be interested in seeing the antenna placement templet as well. If I remember correctly, it was only my '85's that had the antennas consistently in the same place. Can't wait to see it all finished up!
 
I really should be selling this stuff instead of using it up...

Of course you dont mean that...! ;) Only sell if you have extras...like 5 extras! :D

Again, very nice Jeep. Gonna look even better with all this correct stuff on it. :woot:

Speakin of correct, how did an SR-4 "push down for reverse" NOS 1980 shift knob get in that pic ? :)
 
I'm glad that Scrambler went to such a good home. It was beautiful to begin with but now it is going to be spectacular! :drool:
 
NOS Shift Knobs

Thanks for compliments guys, it really is a nice Scrambler. :bow:

Of course you dont mean that...! ;) Only sell if you have extras...like 5 extras! :D

Again, very nice Jeep. Gonna look even better with all this correct stuff on it. :woot:

Speakin of correct, how did an SR-4 "push down for reverse" NOS 1980 shift knob get in that pic ? :)

Well before this Jeep is finished being refreshed.... I'll be using up an easy 5 to 8 Grand of NOS parts, not to mention years and thousands of miles driven hunting this stuff.

I grabbed up a 4 speed shift knob, at least I didn't install it yet. ;)
I've got a blank NOS knob, but need an T-4 insert, anyone got one of those?

Anyone ever compared a reproduction knob to a OEM knob?
Or the reproduction inserts to a OEM insert?

Also notice the hood footman loop that came off this 82.
It's rubber coated as were the U shaped bumpers.
Screws are exposed on top, what year did Jeep go to hood footman loop with studs? (see previous post for picture) I've also seen some CJ's with metal hood footman loops.

photo1724-1.jpg


I know the silver hood spring latches had studs in 85-86, as I just traded a perfect NOS pair away to help a guy with 86 Laredo.
The 81-84 fenders have nuts welded underneath where can use a phillips machine screw to hold latch.

photo1123-1.jpg

DSC009273-1.jpg
 
I have NOS 4-speed insert, sent you an email.

The NOS shift knobs are slightly lighter shade of black, softer feel, and the texture is different, more detailed. The replacement knobs are harder feeling and more "plastic-y" I have pic of knobs next to each other, I will find.
 
Inserts and Knobs

Insert is very different, text is not as bold, wrong color, the whole insert the clear part isnt as clear, so it almost looks smoke colored. And sometimes you get a really bad replacement one, like this one has a defect in the clear part, a line through it, not smooth:


IMG_5897 by jerseyjeeps, on Flickr

And here is NOS on left, replacement on right. it is just the picture that makes them look much different in size, they really arent that different, the replacement might be slightly taller, but not by much.


IMG_5903 by jerseyjeeps, on Flickr
 
Young again

This jeep and restoration are eating me from the inside out.:evil:

Awe man... this is what seperates the men from the boys.

If U can't take the sight of seeing NOS parts, don't open this thread :cheers:

I wish I was your age again and had double pedigree doctor smarts.

I'd be happy with a triple Black SL Scrambler for my first car.

Now.... All U gotta do is study hard for years and become a doctor specialist and make super amounts of money and buy this Scrambler. :D
 
Floor

Drivers side floor has paint rubbed off.
Not sure if I should POR15 black or paint Red ?
Or leave alone and just polish and wax the bare metal ?

I've got carpet for the T4 -T5.

Got a couple hours & concentrated on passenger side.

Was nice outside :) so I sandblasted the tire carrier to body bolts.

Wax on:
photo2201-1.jpg


Wax off:
photo968-1.jpg
 
Back
Top