• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Pilot Bearing / Bushing issue

cruser

Legacy Registered User
City
Buffalo Gap
State
TX
The picture shows the Pilot Bearing (right) that was removed from a 6 cylinder 258. The brass Bushing (left) is what I have to install. The question is do I replace it with one like the original or does it make a difference ??:shrug:

I appreciate your help ! :D






IMG_0346-1.jpg
 
I've used both with success but I'd do what My Sunshine advises as I've seen his shop and trust his opinion
 
both will work...i like the brass because it wears gradually and does not fail all at once..but..i doubt there is much difference
 
both will work...i like the brass because it wears gradually and does not fail all at once..but..i doubt there is much difference

They only fail if there isn't any grease for the bearing and/or they are put in backward- I have yet to come across one that has failed except for those above situations.
 
Thanks very much for your responses guys. I appreciate it very much. :wave:


:smokin::smokin::smokin:
 
Back
Top