• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Radiator blew driving through the mountains. Need to replace

Richybdad

Basic User
City
Stayton
State
OR
Can anyone point me to some threads on radiator replacement? I have a chevy 350 in mine. I am not sure what type of radiator I had. I am guessing stock to 1981 CJ-8 because the heating hoses are present. Still not sure though. Maybe some suggestions?
 
Those are quite nice. So those will bolt right in and the heater hoses will be ableto mount right up? Heat is important in Oregon haha
 
Can you post a picture of your current set-up? Be Cool is great, although Northern units work just as good for a lot less.

The only radiator I've seen with a heater return is stock Chev, which I doubt would fit. Unless yours is custom. Might you be talking about the trans cooler lines?
 
Just saw this- I was in Portland for a wedding. Drove by Stayton at about 3:00 today!

Is it just one hose to the radiator? This is like the older Chevs, and you can change the system so one hose comes from the water pump, and the other goes to the intake. That's how the newer Chev's do it.

Crappy picture but it was the best I could find on short notice.
116_9902_502_15_z-1.jpg


Northern Radiator- this is what I use to cool my 5.3, and the 350 before it. This listing says it has a 5/8" heater return, but the pic doesn't show it. And, it's not hard to convert from a top flow to a side flow for the trans cooler lines.

T2eC16JkE9s4Z49wBRC3WNeh60_12JPG-1.jpg


http://www.ebay.com/itm/Jeep-CJ-SBC...Parts_Accessories&hash=item460c5ecfed&vxp=mtr

I initially used a cheaper 3 copper/brass radiator, but it started leaking after a year. The local rad shop said it wasn't worth fixing. It wasn't the greatest at cooling, either. The 2 row Northern I pictured is great quality (been in mine for years) and cools much better.
 
Last edited:
I took the one that was in my Jeep out to the local radiator repair shop and they are saying they may be able to repair it for $50. If they aren't able to I will look into the above one. It is a thing of beauty lol.
 
For $50 it's worth a shot, even if you just keep it as a spare.
 
Exactly. Right now I have the heater out. Doing the blazer fan upgrade. Made the hole bigger with no issues. Used a dremel and grinder.
 
I've got a complete blazer setup that was in my Scrambler sitting in the side yard...
 
I ended up putting in an aftermarket air system. But the factory system with the blazer motor had a much better heat/defrost volume.
 
Back
Top