• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Rancho Shocks

Grey Fox

SOA Member
Lifetime Member
City
Bountiful
State
UT
Can I run Rancho RS9000 shocks shaft end down? Presently they are mounted shaft up or housing down. My problem is they are mounted so close to the front leaf springs (SOA) that at full flex the leaf springs are touching and denting the shock housing tube. So the easy fix is to flip them.
 
no..if the valve is up then no oil goes thru the valve...so u dont have a damper any more...since they are a gas charged shock gravity keeps the oil on bottom and NO2 at the top...if its upside down..the no2 is what goes thru the valve.


monotube shocks or shocks with a freon or foam cell inserted in them can be mounted in any direction....steering stabilizers are made with a foam cell inside and no gas....so the valve never gets starved for oil when mounted horizontal.

I u ever want to see if your shock can be mounted upside down....turn it upside down and cycle the unit by hand a few times....if it looses its prime and quits damping (converting kinetic energy into heat) it must be mounted with the reserve tube down and rod up.
 
Last edited:
ahhh, makes sense. So Rancho makes a remote reservoir style, can they be shaft down?
 
Thanks Scott
Next question. I'm having an issue with wheel hop (rear) on vertical climbs or step ups. I'm running a SOA with a traction bar. I turned the shock valve in,clockwise most of the way thinking that would slow down the damping and it seemed to help. So first question, is my thinking correct, and would the pro series ranchos give me even more damping adjust-ability?
Kim
 
i will research that tomorrow and get back to you..those are made at our nebraska facility..so i will have to educate myself
 
Back
Top