• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

RE 4.5" lift belly height?

ajmaudio

Basic User
City
nashville
State
tn
Hey everyone... looking at options for lowering my 8.. currently SOA on 35's and its pretty high... Looking to lower my cog a bit... currently about 23" to the frame.

Wondering if some of you that run the RE 4.5" springs could give me your frame height from the ground? Please state your tire size as well.. Thanks in advance!
 
Not sure where you want to measure from. On mine, I measured right behind the front spring perch, 31" to top of frame. Tires are MTR 35"
 
Mine has not settled in yet and it's 23.25" at the frame with 33's.
 
I'm interested too
I have tired alcans supposedly about 4inch
Running 37's they are flat and thinking about replacing them in the fall
 
Mines 24 inches just behind the rear spring hanger on the front spring, with a 4 1/2 rubicon express lift and 35 inch cooper stts.
 
Mine is 21" from frame to the ground, measured to the rear of the front spring. 4.5" RE lift with 35" BFG KM2's.
 
Oh and mines got a shackel reversal with a little bit of shakle lift.
 
Those of you asking where to measure... lets say bottom of frame at the rear vertical edge of the door opening... Thanks for everyone checking in thus far...sounds like its higher than I expected so far..
 
R.E. 4.5" Springs
M.O.R.E 5.25" Shackles
1" BL
35 BFG MTs

22.25" at "bottom of frame at the rear vertical edge of the door opening"
 
was this from the frame or the spring? thx

From the frame. Basically right below the driver's feet. The frame sits level to the rear hangers from there back. My RE4.5 kit seems to have sagged more than most. It's about 2 years/20K old.
 
Thanks... Yours is closer to what I was looking for... Seems like this lift nets more than 4.5 inches to me.. certainly no less. I am at 23 5/8" on 35s and feel it could come down at least 2 full inches with fenders or fender mods. Anyone got any flex pics or comments on the springs? Trying to decide on this route or some custom springs that are longer to improve flex and ride. Was going to link the front but have decided to keep it simple as I have loads of other work to do and wish to drive the 8 this year.... missing tooo much great jeep weather.
 
that seems very very high? Higher than my 8 SOA on 2inch springs... not 2 inch anymore im sure but still
 
Back
Top