• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Rear Seat in an 8

Totally Pimp!!!

I'll be putting the seat from that TrailMax Series in the front of my Postal... Might have to get the rear seat too now that I see it in yours.

Nice!!
 
Explain what you mean about Weather + retractable = not good.
I live in Florida and drive without the top all year round.
Wayne.
 
Please watch out for our snow birds. They tend to run into things with their Crown Vics.;)
 
Wayne, very nice job.

I'm considering putting a 2nd row seat in an 8 that has never had one. To what underneath did you attach it to so that the bolts don't rip out in a crash?

I like the raising it idea. Would like to see anyone's examples.

Has anyone any input on a safe way to do a 3rd row seat and is it really practical from a sitting / "comfort" point of view to even do so?

Hate to cut a virgin back bed but have family needs.

Thanks.
Thanks.
 
Wayne, I must have missed where those pictures were posted... you ought to check on the lockup mechanism with those rear retractable belts when you hit the brakes if you haven't already. My postal had lap belts stock and they mounted with a pin below the bolt hole (it looks like it's on a part that was cut off of yours in order to mount them angled like that) that went in a hole in the body that held them vertical. I think that them being vertical is critical to the function of the locking mechanism.

I know the 3-point belts I put in that's definitely the case. I had the cover off of one of them and saw how the locking mechanism works, I played with it a bit because I'd never seen one open.

Just don't want to have anyone find out the wrong way.
 
Just to be a stick in the mud, you are not supposed to attach two different belts to one mounting point. (Please don't look in my cab).;)

That's the way the inboard belts, for the rear seat, mount to the floor on a CJ-7. The seat and seatbelt holes were there on my Scrambler, just had to clean the threads with a tap.
 
If my memory is correct the seat came with a backing plate for the anchor point.
Wayne.
 
Only the early '82 models had lap belts, like did all the '81 CJ8 models. One day, I plan to swap to lap belts in my '83.

Don't get pulled over with just lap belt in your '83. The laws state that the original equipment safety equipment has to be installed and functioning. Around here lately the caps have been a little over zealous, and writing click-it tickets to anybody without shoulder belts regardless of the year of the car.
 
Back
Top