Rebuilding CJ8

[dskinner8677]

Can anyone point me in the right direction to buy replacement parts for my Scrambler. I have a rust problem! What supplier(s) are good to work with. I will need fenders an quarter panels and the correct gaskets between windshield and hardtop. Any advise would be greatly appreciated!
Best
Skindog

 

[Interceptor]

Oh nooo.. another one down the rabbit hole (lol)

 

[jc_chandler]

I used panels from these guys, very well made and no e-coating...https://www.classicent.com/jeep/81-86-CJ8/all

They don't make replacement fenders though and I've heard the ones that are out there are junk. Might be better sourcing a solid OEM set on ebay/CL/FB.

 

[Flatie46]

I agree with Chandler, the panels I have bought from Classic have fit very well plus they are American made. I would also look for original fenders. The stuff you would get from Quadratech and some of the other companies are gonna be a dissapointment.

 

[Scramblin Man]

Classic enterprises panels are spot on. Heard Key parts are good. The qtr panels are going to be the most difficult. The only ones stamping them for an 8 is md Juan. The top profile is not correct and the raised profile at the wheel well is rough. You should be able to locate some usable OEM fenders.

 

[dskinner8677]

I used panels from these guys, very well made and no e-coating...https://www.classicent.com/jeep/81-86-CJ8/all

They don't make replacement fenders though and I've heard the ones that are out there are junk. Might be better sourcing a solid OEM set on ebay/CL/FB.

Thank you Chandler!

 

[dskinner8677]

I just want to thank everyone for your help. Thanks C handler!
Does anyone know makes these tops to fit our Scrambles?