• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Recommendation for bump stops on 2-1/2" BDS lifted Jeep Scrambler widetrack

jak inc

jak inc

I H8 RUST!
Lifetime Member
City
Merton
State
WI
Would anyone have a specification/recommendation for taller bump stops on a 2-1/2" lifted Scrambler? I would prefer the stock style even with an extension. Thanks in advance.
 
Last edited:
I have ordered these... (4) Daystar Polyurethane Bump Stop KU09016BK and (1) Daystar Polyurethane Bump Stops - KU09006BK for the pinion bump stop.

I will follow up with how well they fit.
 
These daystars work great with a little custom bend to match the frame rail. I was able to re-drill and tap (3/8-16) the rear most holes and drill and tap new holes for the forward hole for the rear axle.

tempImage20bMFW.pngtempImageCJJDX6.png
 
Anyone ever install Timbren bump stops? They are really pricy (about $300 a set) but video looks nice and cushy.
Timbren.jpg
 
The fronts just needed a slight custom bend to match the frame rail. I was able to re-drill and tap (3/8-16) the front most holes and drill and tap new holes for the rear hole for the rear axle. The pinion stop was an exact fit.


tempImageqUfETN.png
tempImagetUHmuw.png
 
I didn't like the bump stop choices so I bought the extensions that go under the u-bolts. Can run the OE style with these.

20190407_110640.jpg
 
You must log in or register to reply here.
Back
Top