• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

rocky road offroad cj too YJ spring conversion peice

The Real CJ8

Small wheel
City
fredricton
State
NB
Has anybody tried this

Looks very good much better than the RE way of adding wrangler springs to a CJ
joel
 
Just use a 2nd set of rear CJ shackle hangers and flip them around for use on the front. Cheap & effective.

Craig
 
1x1_Speed_Craig said:
Just use a 2nd set of rear CJ shackle hangers and flip them around for use on the front. Cheap & effective.

Craig

x2

Truck
 
That doesnt look bad but as mentioned you could put rears up front and save the 100 bucks.

You do want to move the shackle hanger forward because the YJ springs are longer. Just knock out that rivot, re-enforce the frame with a weld at the crossmember and put the bolt through the hole where the rivot was.

Looks like this:
Crossmember_Weld.jpg
 
I have them on my Scrambler and they are made well. Even saying that I wouldn't buy them again from RRO. I am removing the ones on my Scrambler to go back to a shackle reversal.
 
Back
Top