• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

seatbelts???

gaducker

Legacy Registered User
City
Newnan
State
ga
Anybody put any modern belts in there jeeps with a 3 point set up??
On the pass side were the seat wont slide theres not much room for a big fella, Im am 270lbs and while I can get the pass side to buckle i can move at all with it buckled. I need some a little longer..
 
My belts are a bit too long...they came out of a 2004ish Dodge van, IIRC. They just about bolted in. I think they came from one of the rearward rows- I got a bunch of belts and seats from a passenger van that the owner had us remove because he needed a cargo van.
 
Check out this place. https://www.seatbeltplanet.com

They can custom a longer belt or they also sell extenders. PLUS!!! (this is my favorite part) They sell seatbelts in lots of colors!!!!! Plante
 
Last edited:
I just added the extenders from JC whitney. My wife is short so with the seat all of the way up the belt was maxed.


Dain
 
I ordered mine from gotbelts.com , this ends up actually being Beams that you are ordering from directly.
 
Ordered me some 12 inch extenders, we will see how that works. Thanks guys.
 
Not to take over. But, how and where do you get the hole for the roll bar to make it 3 point?
 
Not to take over. But, how and where do you get the hole for the roll bar to make it 3 point?

Its an 83, they came that way, if you don't have it already in your roll bar you can put you an anchor point in your roll bar if you can run a drill and know how to weld or buy you a later model rollbar that's already got the anchor point in it.
 
Mine is an 82 without the hole. Just need to know where to get a threaded anchor point
 
Probably a silly addition to this thread because I haven't really searched for them yet, but are the plastic caps that cover the rollbar-mounted bolt readily available?
 
Also the roll bars with out the seat belt hole sit farther away from the top than the ones that came with the mounting point. about 2 1/2 inches as apposed to 1 inch.
 
Also the roll bars with out the seat belt hole sit farther away from the top than the ones that came with the mounting point. about 2 1/2 inches as apposed to 1 inch.

Never knew that.
 
Also the roll bars with out the seat belt hole sit farther away from the top than the ones that came with the mounting point. about 2 1/2 inches as apposed to 1 inch.

I think they are more straight up and down , they mount in the same place and then come straight up instead of leaning forward matching the angle of the top
 
I think they are more straight up and down , they mount in the same place and then come straight up instead of leaning forward matching the angle of the top[/QUOT

At least when I got my 83 it had no roll bar and I bought one that did not have the seat belt mounts and it say way back from the top compared to my 86 I had so after many questions some one told me the same thing, and I got one with the mounts and you could see the difference in angle when sat side by. The later model with the mounts also has footman loops at the bases where the early one don't for those who didn't know.
 
Back
Top