Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
New problem. It will barely idle when cold, and will sometimes die, but idles fine if not a little high when it warms up. The choke is working correctly.
sounds like the fuel and air mixture screws on the front of the carb. bottom of the carb one on each side. tighten them in one at a time till just before the motor dies. then back it off a hair. adjust he other one the same way. just wash, rinse, repeat till you get them dialed in.
here's how i did my cable. bad shots, old pics for something else. but should get the point across.
Yup. It was the air/fuel screws. It runs a lot better now. The choke works like it should, but in still working on the idle. When it's cold it won't idle on its own for a minute or two. Once it warms up a little it'll idle better. Once it's at operating temperature it idles higher than I'd like. I may lower the idle with the idle screw and just deal with it when it's cold.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.