• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

TJScrambler - Getting Started

I gotta say, after taking one of these apart with no regard to original mounts, or considerations for rebuilding stock, you guys have my admiration!! What we did with our own design was so much easier than what you are doing!! Awesome work gentlemen!!


 
Awesome work!! (as always)
How are you welding? do you have a spot welder? or?
 
Awesome work!! (as always)
How are you welding? do you have a spot welder? or?

A buddy of mine does have a spot welder and I am going to see if I can grab it to use, but this time around I am using the panel bonding adhesive as well as filling in the holes for the cleckos/screws with weld.
I think it will be plenty strong.

cb
 
Tried to squeeze in some time in the freezing garage. Heater took a while to catch on and get going. Was looking for parts which lead to cleaning and labeling boxes

0936dfb6e968c3bc802e66ed8a9f944c-1.jpg


Then went through the delivery

New side panels. Look nice for repair pieces

9c360893ac1662341eae58809f1fc4e9-1.jpg


Metal finally warmed to try to fit the wheel well

f8275da1baa6368624d23bf53a46d55b-1.jpg


50d8a57ce77937c0b1188f3251fa576a-1.jpg


Fastening in now having a cold one. In the cold. Lol

cb
Sent from the garage
 
What are you heating your garage with? I have a little two burner deal you attach to a propane tank. My garage is way to leaky when it's in the teens or single digits for me to get down there. And like everyone else says very nice work. Always a pleasure watching Your builds.
 
Father in law moved to FL and left me a 220 1970s heater. Shop is 22x20x12 so it takes a bit but does warm in up

cb
Sent from the garage
 
Showed my daughter the differences between rusted and new


Final analysis

New is bettah

266c76d1828756946ce4b937d5fbfe14-1.jpg


cb
Sent from the garage
 
What are you heating your garage with? I have a little two burner deal you attach to a propane tank. My garage is way to leaky when it's in the teens or single digits for me to get down there. And like everyone else says very nice work. Always a pleasure watching Your builds.
2 other things on the workshop

First it is insulated with r30. Did that years ago and sheet rocked. Still very leaky

Second I am a new englander and a sob. Stubborn etc. I will work when most will not as I get so far fewer months to do [emoji12] .

I love winter. Lol

cb
Sent from the garage
 
It is now stupid cold out here. Had to air out the grinding and welding and burning


Going in


Here we are

2b0f75abddd9f5346d1a8a0bc4a89226-1.jpg


cb
Sent from the garage
 
Still very cold. However it was 15 all day and supposedly no snow only rain over night. Whatever crazy weather

a6916f834f3f5b568f5566242e52f760-1.jpg


Fitting and drilling

a5b212ca347cc41ac2a6ff238d86350a-1.jpg


Drilling spotwelds

8bdf23a696f464e438a3ee80781dc0dc-1.jpg


Leftovers

2f99a1738e2a552ac01e30c26aef871e-1.jpg


Making progress

6d68fecc06599eeaa2c172b6e943728f-1.jpg


Fixing body mounts

7639cadaa69df420d2c7dfde9020c71c-1.jpg


Freezing out now. Heater not keeping up

6d20cccd306f5167c394788a8b2b63b7-1.jpg


Until tomorrow


cb
Sent from the garage
 
Nice progress! :thumbsup: Keep up the awesome work. :wave:
 
Was a jeep parts selling kind of night so no real progress. Got the rear rollbar mount done and posed up the wheel well for inspiration

6d15eee39a71a15aaf94fbb3ede7245c-1.jpg


b91e6a5bc7a92a218922cf2dd0bfc5d3-1.jpg


9635d9a4765ad254581164e159b675f1-1.jpg


4e7b1b61a7f285139df7d3734a9cbdb2-1.jpg


b250b3316a9595b378660afb80ef82ff-1.jpg


cb
Sent from the garage
 
Ok. So more spot welds drilling and test fitting and making it fit. All panels are great. Last one is a bit snug

f6a0077c837b4962186465ebc056286c-1.jpg


f368c39b78c57859c9dd920c39481b30-1.jpg


099ef0e94f97cf8b21fb84af4b023daf-1.jpg


d0a83118a6fa18b0f92fc6abb7ab9b16-1.jpg


075de556fe05db655e5f1909997314c5-1.jpg


7df1c679e9b25a275b0d9963cd7d3800-1.jpg


1c8c8a3aa0d8017aaa985ca7281aa71c-1.jpg


Rollbar was frozen solid. Tomorrow big reveal if it fits

cb
Sent from the garage
 
God you do such nice work. I wish I was closer so I could learn more. But when I move I'm going to the South of Pa not the North.
 
Thanks for the kind words. Right now I am scratching my head in how to proceed with the front stuff. Beer in hand d though so there's that. [emoji41] [emoji481]

cb
Sent from the garage
 
Scratching my head and measuring 4x over I remembered a quote from the smartest man I ever knew. "Keep cutting until you get to good wood" second smartest person. Same advice but with human tissue. So metal has to be similar. Cut until you get to good weld able metal!

58788d615342496b8ce24b767588631d-1.jpg


d8565b0bb7aa48b82ed940afb1fb5ef3-1.jpg


5a9099642472ffb081cc0556c9a1f8b1-1.jpg


2d244d39cbb13a454a334828c1cabb66-1.jpg


And just so we are all on the same page. I thought this was a very good tub. It is not!

cb
Sent from the garage
 
Back
Top